formyhealth - 1991 318is Build Thread - now with 1000% more 1JZ-GTE

[Sh3rpak!ng]

Oooooh [emoji3]

Sent from my SM-G973U1 using Tapatalk

What's that?

Sent from my SM-G960U using Tapatalk

[formyhealth]

Oooooh [emoji3]

Sent from my SM-G973U1 using Tapatalk

[formyhealth]

Got the oil cooler and intercooler installed today, and found some nice 6AN adapters for the steering rack lines. I'm going to go with a Volvo pump to save space in the footwell area.

Sent from my SM-G973U1 using Tapatalk

[formyhealth]

Kinda jumping around a bit on projects but worked on fitting the front valance today.

Sent from my SM-N950U using Tapatalk

[formyhealth]

Well, I scored one hell of a deal today. 15x7 Team Dynamics wheels with healthy looking Toyo Proxes RR slicks, $300!! Quite happy and they fit over the rx7 brake calipers.


Sent from my SM-N950U using Tapatalk

[e30RS]

Gunna be beastly.

[formyhealth]

I need bigger wheels but these are going to be sweet!

Sent from my SM-N950U using Tapatalk

[formyhealth]

Diy big brake solution arrived! These are 4 pot calipers from a 1991 rx7.





Sent from my SM-N950U using Tapatalk

[formyhealth]

As an owner of a Focus ST and E30, I cant wait to see this in action

Can't wait for all of the torques!

Sent from my SM-N950U using Tapatalk

[iso_hi]

As an owner of a Focus ST and E30, I cant wait to see this in action

[formyhealth]

I got the engine back up on the stand today to start working on lengthening some of the harness wires. Will be glad to be done with this part!

Sent from my SM-N950U using Tapatalk

[formyhealth]

I assume there is enough drain from the back to the front like the stock ones are?

Hopefully!

I'll be baffling the sump area and may end up inserting a slanted plate inside of the flat section to give it the proper drain angle. Or I give the whole engine 1 or 2 degrees of forward slant which should do the same thing.

[econti]

I assume there is enough drain from the back to the front like the stock ones are?

[formyhealth]

Had Under Pressure Racing Development weld up all the pieces I put together for the oil pan. It's a front sump now!

Sent from my SM-N950U using Tapatalk

[formyhealth]

Big work, love it

Thanks man happy to be working on it again.