Driver seat belt buckle
Dash and working cluster
Fog light switch
Wiper switch
The plastic piece that pops into auto shifter housing.
The street shark e30
Collapse
X
-
Replace that intake boot with new if you can. A used one may not have much life left.
Good luck with the car. They're a lot of fun, but many inexpensive e30s require a ton of "catch up" maintenance to reach a certain level of fun and reliable.Leave a comment:
-
What interior part's you need? I got some for saleHere's a pic. This is the good side. The other side has a small dent where someone backed into
Need help anyone that reads this.
Have an idle of 1000 rpms. When in drive the rpms will drop to around 700, and eventually the brake pedal will get soft. I have sprayed and sprayed carb cleaner and now I'm out. Still can't find a leak. Any insight on this problem? And does anyone have a vacuum diagram?
Sent from my SAMSUNG-SM-N910A using TapatalkLeave a comment:
-
Ok so I reinstalled the cluster and now I have a inspection light on. Did the SI board go bad in a day?
After I cleaned the iac, it still idles around 950-1000 rpms but it drives great besides the brakes that I have to double pump every other time. Ordered a rubber boot for the throttle body cause mine is developing cracks.
But took for a test drive and noticed a vibration develop, looked out the window and the spacer on the front came loose on the wheel. So had to wait for my dad to get there with tools to tighten it back up. This is why I need wheels without spacers...Leave a comment:
-
Anyone else have a problem with only half the cluster lighting up?
I have changed it to an led and it still only works on one side. Would I need a cluster. Everything else works besides the bulb that blew in the turn signal.Leave a comment:
-
It doesn't go all the way through. I pulled it a hair and sprayed with choke cleaner and it never idled up. But I can't post a wanted ad till after 10 posts. So it's on the list of stuff I need.Leave a comment:
-
There's a fairly large crack in your intake boot right below the tip of your finger in that pic. I'm sure that's not the only one so that may be something to check/replace.Leave a comment:
-
This piece right?
I cleaned it and reinstalled but had to jb weld the metal piece that goes into the throttle body. So I can't start it up for 24 hours.
Last edited by Bggdnssnguy; 05-22-2016, 12:10 PM.Leave a comment:
-
I had a dirty iac give me some headaches even after replacing every vacuum line. I cleaned it with brake clean and haven't had any problems since then. Might be worth checking outLeave a comment:
-
Here's a pic. This is the good side. The other side has a small dent where someone backed into
Need help anyone that reads this.
Have an idle of 1000 rpms. When in drive the rpms will drop to around 700, and eventually the brake pedal will get soft. I have sprayed and sprayed carb cleaner and now I'm out. Still can't find a leak. Any insight on this problem? And does anyone have a vacuum diagram?Leave a comment:
-
The street shark e30
Well Sunday I bought a e30 325i for $1500
Has a high idle at 1000 rpms and no brake pedal in drive. But has a firm pedal in park. So I'm gonna start looking for a vacuum leak. Needs a wiper motor and 2 tires.
Needs interior parts, like a lot of them. And exterior trim along with a new exhaust.
I will post pics later when I can.Last edited by Bggdnssnguy; 03-26-2017, 06:22 PM.Tags: None

Leave a comment: