Announcement

Collapse
No announcement yet.

Mini Cooper s

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Go to Japan if you want to see some weird names on cars.

    Comment


      #32
      put a Honda K-series in it!
      "I came into this world, not chiefly to make this a good place to live in, but to live in it, be it good or bad" -Henry Thoreau-
      1991 318is - the cruiser
      1989 325i - the rats nest

      Comment


        #33
        Originally posted by djjerme View Post
        Twin Engine Mini Cooper
        Car & Driver did it (first?) with a CRX in 1985...

        Originally posted by kronus
        would be in depending on tip slant and tube size

        Comment


          #34
          Believe it was done earlier than that with a twin engine Scirocco !
          https://www.facebook.com/BentOverRacing

          Comment


            #35
            And probably even earlier with the original Austin mini's. Called them twini's

            Comment


              #36
              Glen used to have one, but he probably wants to keep that a secret....
              cant go wrong for 750$
              the trans is worth more than half that

              Comment


                #37
                Took the head off this weekend. Don't see anything wrong with the Pistons or head, for the compression loss. I'll clean it up just to make sure. So I'm hoping for just a blown head gasket. I can see were it was blowing past the gasket. I'll check the head for flatness. If it looks good I'll slap it back together.

                Comment


                  #38
                  Originally posted by 89325iturbo View Post
                  Took the head off this weekend. Don't see anything wrong with the Pistons or head, for the compression loss. I'll clean it up just to make sure. So I'm hoping for just a blown head gasket. I can see were it was blowing past the gasket. I'll check the head for flatness. If it looks good I'll slap it back together.
                  How do you rate the difficulty level of the job...3 or 5 wrenches?

                  Comment


                    #39
                    Originally posted by AudioNToxication View Post
                    Glen used to have one, but he probably wants to keep that a secret....
                    cant go wrong for 750$
                    the trans is worth more than half that
                    shhhhhhhhh
                    sigpic

                    Comment


                      #40
                      I thought it was fairly straight forward, everything was easy to get to. No bolts that were awkward to get to. I was expecting it to be more difficult, cause the bay looked crowded.
                      Last edited by 89325iturbo; 08-08-2016, 04:18 PM.

                      Comment

                      Working...
                      X