Another M20 Turbo Build- Redbone

[Redbone]

You are making serious progress!

Excellent stuff.

A wise man did say progress is a slow process. Thanks bud!


Sent from my iPhone using Tapatalk

[Redbone]

E46 rack in. Just have to make some modifications to the firewall.


Dyed carpets back to factory grey. Here a before and after shot.


Sent from my iPhone using Tapatalk

[Redbone]

Progress pics


Sent from my iPhone using Tapatalk

[TheTacoMan]

A supra and an m20 block in the same picture.
Wut.

[Redbone]

A supra and an m20 block in the same picture.
Wut.

Inline6 love!


Sent from my iPhone using Tapatalk

[eThirtyAaron]

Awesome stuff so far. I'll be tagging along on this one!

[Redbone]

Awesome stuff so far. I'll be tagging along on this one!

I'll try and keep it interesting!


Sent from my iPhone using Tapatalk

[Redbone]

So the engine rebuild is complete.


Sent from my iPhone using Tapatalk

[sampayne]

lookin good!

[Redbone]

More picture because who doesn't like pictures.
So to update, if you remember from the beginning when I bought the 30 I never got to see it running therefore I don't even have a baseline. I have to decided to break the motor in NA. This will allow me to work out any kinks and focus on getting everything back to OEM spec. It doesn't really set me back too much. This week I will be putting the motor and tranny in the car.


Sent from my iPhone using Tapatalk

[Redbone]

Some work had to be done on the engine harness because the oil pump switch wire was fried straight back to the eCU. So I manage to get that squared away. A lot of progress has been made since last update and Wallah

Since I installed my E46 M3 rack I had to make some changes to the firewall boot.

There is no Turbo bits bolted on yet. I plan to finish buttoning up the engine bag before I complicate things further. Next is to complete the harness and drivetrain.

But more pictures



Sent from my iPhone using Tapatalk

[robrez]

Following. Great job.

[Redbone]

Following. Great job.

Thanks for tuning in!!


Sent from my iPhone using Tapatalk

[Redbone]

Went with a moderately sized intercooler.

Mock-up for intercooler piping. I want to be as simplistic and neat as possible while retaining high beam lamp.


Intake side of charge pipe

Don’t have pics but I redid the fuel lines oem hardlines. Swapped out the small case diff that turned out be LSD to the medium case 2.93. Wire tuck is complete with pictures coming soon. I had to get a M20 drive shaft cause the 318 came with a g240 ofcourse. Sourced one on eBay.

Presently I’m looking for a stock exhaust system for the mean time.


Sent from my iPhone using Tapatalk

[Redbone]

Waiting for my brake booster/ABS delete from Chase Bays to finish up the hydraulics.


Sent from my iPhone using Tapatalk