Announcement

Collapse
No announcement yet.

TicTac M50 Turbo sedan, no more tictac. 2021 UPDATE, 1000hp

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    TicTac M50 Turbo sedan, no more tictac. 2021 UPDATE, 1000hp

    Thought I'd share my latest "build", just a 4dr 316i.

    Engine: M50B25, double intake cams, ARP-headstuds, e85, 1100cc ev14, 450lph Walbro, Schwitzer S300 66/74, 60mm wastegate, 3,5" exhaust, Ecumaster EMU PnP

    Driveline: e36 328/M3 ZF gearbox, m30 flywheel, SRE 765 pressure plate, 6-puck sintered disc, 2.65 or 3.46 welded diff depending on what the car is used for

    5-lug, brakes etc: BC Racing BR Extreme drop, e36 front hubs and some custom parts, e46 330i 325mm discs up front, e36 m3 calipers, e36 steering rack, e46 lower control arms, T-Parts steering adapters, e36ti axle and brakes at the rear

    Wheels: Style 20 8x17" et20 (16mm spacer up front), usually running a set of 10,5x17" futuras in the rear

    Interior: Fully gutted, Bimarco seats, Sablet harnesses, Sparco bolt-in roll cage, PMC-motorsport shifter

    Exterior: Fiberglass M-tech2 bodykit, M3 evo spoiler, TicTac livery

    This is what I started with:


    Aaaand now we are here:





    This is the wheel setup I usually have on the car:



    Pics by @mattitirronen, link to my personal instagram in my signature below (burnout clip, 3rd last post)
    Enginebay photos will be added later:)
    Last edited by micke_; 10-11-2021, 02:16 PM.
    https://www.instagram.com/m1ckee_/

    #2
    One of my favorites! Has been my desktop background for some time now. 8-)
    BimmerHeads
    Classic BMW Specialists
    Santa Clarita, CA

    www.BimmerHeads.com

    Comment


      #3
      Nice work. Engine bay photos? Where did you get the extended flap on the zender spoiler?
      '89 325i OBD2 S52 BUILD THREAD
      Shadetree30

      Comment


        #4
        MORE PICS! Engine bay, interior....

        Comment


          #5



          Originally posted by Sh3rpak!ng View Post
          Nice work. Engine bay photos? Where did you get the extended flap on the zender spoiler?
          It's just a cheap ebay spoiler, like 100€ for the whole thing with the flap.
          https://www.instagram.com/m1ckee_/

          Comment


            #6
            Nice

            Comment


              #7
              Gorgeous! Well done.

              Comment


                #8
                One of my favorite liveries.

                How did you go about the livery?
                ACS S3 Build / Dinan 5 E34

                Comment


                  #9
                  I love it! Very nice
                  Follow my IG @bouchezphotography

                  Comment


                    #10
                    WOW! looks very good!
                    http://instagram.com/mundieriss
                    my 88' m20b30 HERE!

                    Comment


                      #11
                      Thanks!
                      Originally posted by TimeMachinE30 View Post
                      One of my favorite liveries.

                      How did you go about the livery?
                      I contacted a german company that makes other liveries, asked them if it could be done. Got the liveries and put them on the car ourselves, what a PITA:D
                      https://www.instagram.com/m1ckee_/

                      Comment


                        #12
                        How was it fitting the fiberglass m-tech2 body kit? Are original m-tech2 kits getting harder to find over there for a reasonable price and that is why you used a replica kit?

                        Comment


                          #13
                          More pics, wish I had the futuras in the rear but one of the tires popped on the way to the show so I had to change wheels..




                          Originally posted by iXguido View Post
                          How was it fitting the fiberglass m-tech2 body kit? Are original m-tech2 kits getting harder to find over there for a reasonable price and that is why you used a replica kit?
                          It was pretty easy to fit, no mounts on them tho so had to screw/glue the door panels..
                          The main reason for a fiberglass kit was the price, and that the car is built for use. I don't want to damage an original kit.:)
                          https://www.instagram.com/m1ckee_/

                          Comment


                            #14
                            Can you share the dead time settings you used for your ev14s?
                            RHD OBD2 M50b25 turbo build thread:
                            http://www.r3vlimited.com/board/showthread.php?t=384800

                            Comment


                              #15
                              Link to Stanceworks feature, enjoy!: http://www.stanceworks.com/2017/10/t...ged-e30-sedan/


                              Plans for next year:
                              2.8l stroker, I already have crank, pistons and h-beam conrods
                              New wheels and tires, no more stretch and stupidly extreme fitment. Something like 8x17 with a 235/40 Semi-slick, meaty race car fitment! Possibly even drag radials for the rear
                              Stock LCA:s, the camber is too much right now
                              Fuelcell etc. the list goes on.. Hoping to make some 300km/h passes at standing mile events

                              Originally posted by ba114 View Post
                              Can you share the dead time settings you used for your ev14s?
                              I can check! Don't remember them right now
                              https://www.instagram.com/m1ckee_/

                              Comment

                              Working...
                              X