Announcement

Collapse
No announcement yet.

Finally My Car

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Finally My Car

    So I decided to post some pics of my car and list what i want done with it. i also included the wheels i hope to throw on the car. Any suggestions for mods and ideas are appreciated 180k on the ticker:as of yesterday Cost me 2350$

    iS lip
    Eibach lowering springs- this friday
    Bilstein sports
    suspension refresh
    m-tech 1 wheel
    17 borbets-see picture
    E30 m3 suspension-5luggin'
    smoked turn, park and tails
    Z3 shifter-DONE- this friday
    some knob better then mine
    seude matching brake and shift boots
    Elipsoids-this friday
    Click image for larger version

Name:	PICT0361.jpg
Views:	1
Size:	206.6 KB
ID:	7207502

    Click image for larger version

Name:	PICT0379.jpg
Views:	1
Size:	100.3 KB
ID:	7207503

    Click image for larger version

Name:	PICT0381.jpg
Views:	1
Size:	97.4 KB
ID:	7207504

    Click image for larger version

Name:	th_CIMG2466.jpg
Views:	1
Size:	5.4 KB
ID:	7207505

    Click image for larger version

Name:	PICT0378.jpg
Views:	1
Size:	51.8 KB
ID:	7207506
    Last edited by restoration; 10-11-2007, 12:13 AM.

    #2
    I like it
    Originally posted by NavyE30
    I saw Vlad was posting and got excited. Then I saw there weren't any boobs and was sad.

    Comment


      #3
      Nice starter car



      -> Afficionados join the M-technic I club

      Comment


        #4
        looks like my car when i first got it. good luck with the mods. sounds like a good start to me.

        1991 LS1 Swapped 318is
        Instagram:
        https://instagram.com/saltybeast/
        LS Build Thread:
        https://www.r3vlimited.com/board/for...s-e30-ls1-swap

        Comment


          #5
          bump- just wanting to know if there is any other ideas anyone has?

          Comment


            #6
            Are your engine mounts sheered? There is a lot of stress on the air boot.
            Tenured Automotive Service Professional - Avid BMW Enthusiast

            Vapor Honing & E30 ABS Pump Refurbishment Service
            https://mtechniqueabs.com/

            Comment


              #7
              Originally posted by Jordan View Post
              Are your engine mounts sheered? There is a lot of stress on the air boot.
              not that i know of, I will definetly take a look at it!! I was thinking that to cause it is bent back a little

              Ps.what paint can i use for the neddles (red)

              Comment


                #8
                Uhm, I think your priorities are a little askew. If your motor is at that angle, you need to get on top of that before you go painting more little bits on the car.

                Oh, and dont go 5 lug. You will spend as much on that as you did your car. And those arent Borbets in that picture.
                sigpic

                Comment


                  #9
                  Originally posted by E30 Groupie View Post
                  Uhm, I think your priorities are a little askew. If your motor is at that angle, you need to get on top of that before you go painting more little bits on the car.
                  I was wondering cause i remember him painting the needles i wanted to know what paint he used. But if they need preplacing they will be done before anything else to preserve the engine i am pretty much shooting down my goals in this order

                  routine maint.
                  brake upgrade
                  suspension
                  cosmetic

                  Originally posted by E30 Groupie View Post



                  Oh, and dont go 5 lug. You will spend as much on that as you did your car. And those arent Borbets in that picture.
                  hmm then i was decieved guy on craigslist said they were. I might be getting sportmax wheels like bill-B down the road instead
                  Last edited by restoration; 10-08-2007, 01:09 PM.

                  Comment


                    #10
                    You want to check your timing belt or just replace now. If you're going with Bilstein, you might want to check out a GB on some Koni shocks on bimmerforums. They got a good deal going on right now.
                    sigpic

                    Comment


                      #11
                      Originally posted by optimusp517 View Post
                      You want to check your timing belt or just replace now. If you're going with Bilstein, you might want to check out a GB on some Koni shocks on bimmerforums. They got a good deal going on right now.
                      yes by all means run out and get a timing belt for that thing asap
                      We can serve you better through Email

                      sales@blunttech.com
                      www.blunttech.com


                      Like us on Facebook

                      Comment


                        #12
                        Originally posted by blunt View Post
                        yes by all means run out and get a timing belt for that thing asap
                        Don't forget, its easy to replace the vanos solenoid while you're doing the timing belt.







                        *OP, don't listen to me.*

                        '05 E46 M3 Imolarot/Cinnamon - CURRENT
                        '98 E36 M3 Estorilblau/Dove - SOLD
                        '90 E30 M3 Brilliantrot/Black - SOLD
                        SRS BSNS Motorsports - 24hrs of LeMons Racer

                        Comment


                          #13
                          Originally posted by optimusp517 View Post
                          You want to check your timing belt or just replace now. If you're going with Bilstein, you might want to check out a GB on some Koni shocks on bimmerforums. They got a good deal going on right now.

                          HA HA blunt you are great! GUYS!! I have a m42b18 they are dual chain driven
                          should have noticed huge pic that said 318is: no harm no fowl

                          Comment


                            #14
                            I didn't paint my needles on my old e30. They were MZ3 needles.
                            Tenured Automotive Service Professional - Avid BMW Enthusiast

                            Vapor Honing & E30 ABS Pump Refurbishment Service
                            https://mtechniqueabs.com/

                            Comment


                              #15
                              those are e46 stockers. nice to see you took my alpine group idea.......ass.

                              Comment

                              Working...
                              X