My M3 with my new 28' Airstream...

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Farbin Kaiber
    replied
    mild OT

    Originally posted by Ben Carufel
    Cool. Should be neat.

    I think in a few years you'll be able to upgrade to LED lighting at a reasonable cost. I'm looking forward to it -- both as an architectural photographer and as a "Greenie", I like the idea of using LED vs. Fluorescent.

    Has it come to the point where color is better? From my time with LED lighting I found it to have a "lifeless" glow to it. Has that been solved and a more natural hue when used for indoor illumination?

    Leave a comment:


  • george graves
    replied
    I think the outside of the shop is going to look great. I bet your neighbors are glad to see you are doing things right. That and some landscaping, and it will look like the shop has always been there.

    Nice work man!

    Leave a comment:


  • Ben Carufel
    replied
    Cool. Should be neat.

    I think in a few years you'll be able to upgrade to LED lighting at a reasonable cost. I'm looking forward to it -- both as an architectural photographer and as a "Greenie", I like the idea of using LED vs. Fluorescent.

    Leave a comment:


  • Farbin Kaiber
    replied
    Originally posted by M3 Ryan
    There are 6 3'x10' skylights which make it very light inside during the day. I ordered some custom T5 light fixtures with motion sensors intrgrated into them. They utilize four 4' T5 54w 5000k bulbs stacked 2+2 to create an 8' fixture, 2 bulbs wide. I am lighting the rear of the shop a lot more than the front due to the majority of work being performed back there.
    The rear area by the lifts will have roughly 75-100 foot-candles of light, so it will be very bright back there. I was going to do metal halide's but they are very expensive, enery consuming and require long warm-up times. With these fixtures you get light instantly and they last 20,000hrs. Bulbs are $5 ea and take a lot less energy to run. With the motion sensors being adjustble from 0-30min I will be able to keep energy costs at a minimum.
    I can't wait to see the goodies installed, lifts, rollaways, assorted niftyness. This looks to be a "Top 5 e30 Owner Garage" by the time your pair roll inside along with everything else. Worth the drive to see in person.

    Leave a comment:


  • M3 Ryan
    replied
    Originally posted by Farbin Kaiber
    Looks like standard 10' next to the Sliding Glass doors in comparo. Why would ya need wider?
    10' by 12' high. I can back my dodge truck in there with the wide mirrors and it clears by 4-6" on each side. Just have to be careful backing a trailer into the building...

    Leave a comment:


  • M3 Ryan
    replied
    Yes, I am 99% sure I will be at Bimmerfest with one of my cars...

    Originally posted by bwanac
    looking really good ryan.

    what are you doing for interior lighting?
    There are 6 3'x10' skylights which make it very light inside during the day. I ordered some custom T5 light fixtures with motion sensors intrgrated into them. They utilize four 4' T5 54w 5000k bulbs stacked 2+2 to create an 8' fixture, 2 bulbs wide. I am lighting the rear of the shop a lot more than the front due to the majority of work being performed back there.
    The rear area by the lifts will have roughly 75-100 foot-candles of light, so it will be very bright back there. I was going to do metal halide's but they are very expensive, enery consuming and require long warm-up times. With these fixtures you get light instantly and they last 20,000hrs. Bulbs are $5 ea and take a lot less energy to run. With the motion sensors being adjustble from 0-30min I will be able to keep energy costs at a minimum.

    Leave a comment:


  • Farbin Kaiber
    replied
    Originally posted by Ben Carufel
    Maybe it's just me, but those roll up doors look kind of narrow. Could you have gone wider? Was there a reason not to?

    Looks like standard 10' next to the Sliding Glass doors in comparo. Why would ya need wider?

    Leave a comment:


  • parkerbink
    replied
    Looks to me that the doors are between the main supports of the center of the walls they are on.

    Looking good Ryan!

    Leave a comment:


  • Ben Carufel
    replied
    Maybe it's just me, but those roll up doors look kind of narrow. Could you have gone wider? Was there a reason not to?

    Leave a comment:


  • bwanac
    replied
    looking really good ryan.

    what are you doing for interior lighting?

    Leave a comment:


  • Mfever
    replied
    are you going to be able to make it to bimmerfest with all this going on?

    Leave a comment:


  • M3 Ryan
    replied
    Quick update for you guys.... I will get some more pics in a few days once more of the grading and start of landscaping is finished. I am having the driveway paved next week on wed/thursday so I will have more pics after that is done. There is some cool stuff I am doing with the driveway which all you die hards will love.
    I am exhausted. I have been working out here non-stop and don't want to stop until I am done with a lot more stuff. Off to bed for now. Enjoy!









    Leave a comment:


  • jimsill
    replied
    love this thread, keep the updates coming...

    Leave a comment:


  • upon3pr
    replied
    My M3 with my new 28' Airstream...

    Wow:razz:!! Just found this thread and Ryan G is 'da man'. Best of Luck with the shop and new digs! Love the Airstream!! Hope to hook up sometime, maybe we'll do some tweaking on my "Ryan G" wanna-be;)(see below)!!! I'm down the road in Modesto. Awesome cars BTW
    Paul
    Attached Files

    Leave a comment:


  • esheg4ever23
    replied
    Comin along nicely...any updates?

    Leave a comment:

Working...