So I painted my mtech cabby......

[beejay]

Mouth Dropping....

[e30damen]

Seriously awesome..

I wish I had an mtech. Nice work

[838Kelli]

HELLA HARD, reppin the BAY

[Kwaaahhh]

Info on the suspension, please! :up:

[Erik]

More pictures STAT.

[bmracer19]

Thanks guys!! I appreciate all the great comments!!

To all that have pm'd me about my wheels and suspension set up. The wheels are DZ Exclusives 16x9 and I am running weitec 60/60 suspension kit with drop hats and Koni short bodies in the front. I am also running custom strut tubes up front where i cut and welded the strut tubes to be as long as the short body koni's. I also lowered the the spring perch by an inch. As for the rear I took out the stock spring pads to lower the front a little bit more. The car is not bouncy at all and rides pretty nice for a spring and shock combo. Its prolly not as stiff as some of the guys running GC setups.

As for pictures, I prolly wont have any until tomorrow or saturday. I sent the car back to the shop tonight to get another couple layers of clear coat. I only did that so that the clear will be glass slick. It will even be more flat after I cut it flat and polish it. I am getting the car back tomorrow after work, so maybe I'll take another set of pictures.

Until then I hope this answer's some of your questions. :D

[Kwaaahhh]

Thanks guys!! I appreciate all the great comments!!

To all that have pm'd me about my wheels and suspension set up. The wheels are DZ Exclusives 16x9 and I am running weitec 60/60 suspension kit with drop hats and Koni short bodies in the front. I am also running custom strut tubes up front where i cut and welded the strut tubes to be as long as the short body koni's. I also lowered the the spring perch by an inch. As for the rear I took out the stock spring pads to lower the front a little bit more. The car is not bouncy at all and rides pretty nice for a spring and shock combo. Its prolly not as stiff as some of the guys running GC setups.

As for pictures, I prolly wont have any until tomorrow or saturday. I sent the car back to the shop tonight to get another couple layers of clear coat. I only did that so that the clear will be glass slick. It will even be more flat after I cut it flat and polish it. I am getting the car back tomorrow after work, so maybe I'll take another set of pictures.

Until then I hope this answer's some of your questions. :D

Sweet can't wait for the update! :D Any chance you have a spare shave gas lid? ;) My car is in the shop getting some paint work, like what you done with the lid. :up:

[AlpineEdirty]

I new it had to be someone from this board.
I saw you trailering the e30 with your tundra couple of weeks ago around university ave.
I was on my way to go fishing at Berkeley pier in my e28 when I saw you.
I must say it looks awsome!

[Erik]

Silver kidneys and some smoked euro ellipsoids would make it look just right up front ;).

[E30trash]

Silver kidneys and some smoked euro ellipsoids would make it look just right up front ;).

nice sig dude! :)

[kylebes1]

Thanks guys!! I appreciate all the great comments!!

That is a great looking car and your body alterations are tastey!

It deserves an m3 windshield to keep that clean look. PM dinanm3atl his friend did it to his non m3 e30.

[bmracer19]

I new it had to be someone from this board.
I saw you trailering the e30 with your tundra couple of weeks ago around university ave.
I was on my way to go fishing at Berkeley pier in my e28 when I saw you.
I must say it looks awsome!

Sweet!! Thanks, you're the first to see it somewhat in person then. HAHA. There are a couple that i have seen around berkeley area. Both were DS, i think one was a dropped coupe with smoked heads and tails and bbs rx(not sure but I know it was BBS). The other was a DS (maybe black) dropped convertible with plastics or painted diving boards. Both sightings happened while i was driving my tundra going the opposite direction so it was hard to detail them out.

Silver kidneys and some smoked euro ellipsoids would make it look just right up front ;).

I'll keep that in mind! Thanks bro!!

That is a great looking car and your body alterations are tastey!

It deserves an m3 windshield to keep that clean look. PM dinanm3atl his friend did it to his non m3 e30.

Thanks, Whats the difference between non-m and m3 windshield? I thought it was the same.

[Motorsports]

That has got to be the best looking vert i've ever seen. Nice work on the car all around. Cant wait to see more p ics of it.

[desertvert]

Good work. Sick.

[skota]

If your ever in Wisconsin.....

Nice work man.