I've got my flame suit on....

[z31maniac]

Yeah the pics are pretty weak, but I wanted to post some. I've got to decide if I want to stay with 215/40/17's and space the wheels out a bit. I'm thinking ~5mm in the front and ~8-10mm in the back. Or go with my original plan of 235/40/17's all the way around and then see where the tires are to see what spacers I'll want, anyway, here's a few pics.





Ignore the bad tire size in the back, got to the shop (1 1/2 hours away) and found out the two used tires I was going to use had broken beads, so the guy that bought my SSR's, had a couple of 225/45/17's to throw on there just so I could get the new wheels on and home.

Just sucks 'cause if I knew I was going to have to buy 4 tires, I would have never bought the matching pair of Nexen N3000's in 215/40/17, so I'll probably go ahead and buy another pair just so its a matching set.

[e30polak]

Paint the bumper trim black, or color match the side molding.

Other wise it's still an ugly bronzit. :rofl:

[z31maniac]

Paint the bumper trim black, or color match the side molding.

Other wise it's still an ugly bronzit. :rofl:

I'm not even going to fuck with the weak ass body kit that came with the car. I'm just going to find some plastic bumpers.

Then drop the coils a little lower.

[e30polak]

I wouldn't say it's a weak body kit, I just don't like the spoiler.

A bodymatched tech1 spoiler like markseven has on his bmp kitted car, finishes the car off nicely.

Black kidneys and shadow line too.

[bimmer_E30]

nice car!!! dibs on bumpers??

[e30polak]

Here you go...I love the way the kit looks with the tech1:

[Farbin Kaiber]

As soon as I got my e30 into the garage that kit came off. I don't know about you guys but I have a fear of driving around with fiberglass bits mounted with grade 3 bolts where my bumpers are supposed to be, that and the fitment was something left to be desired on every single car I have seen. I traded them out to someone for a full bumper swap.

[kenika65]

Lookin clean, here is my bronzit with 17 or course on factory suspension.

Im going to paint them black.



We need to start different threads and it was split in to color and everyone posted their picture!

[Farbin Kaiber]

Lookin clean, here is my bronzit with 17 or course on factory suspension.

Im going to paint them black.



We need to start different threads and it was split in to color and everyone posted their picture!

that is one tyte e30 man.

[DSP74]

Yeah the pics are pretty weak, but I wanted to post some. I've got to decide if I want to stay with 215/40/17's and space the wheels out a bit. I'm thinking ~5mm in the front and ~8-10mm in the back. Or go with my original plan of 235/40/17's all the way around and then see where the tires are to see what spacers I'll want, anyway, here's a few pics.





Ignore the bad tire size in the back, got to the shop (1 1/2 hours away) and found out the two used tires I was going to use had broken beads, so the guy that bought my SSR's, had a couple of 225/45/17's to throw on there just so I could get the new wheels on and home.

Just sucks 'cause if I knew I was going to have to buy 4 tires, I would have never bought the matching pair of Nexen N3000's in 215/40/17, so I'll probably go ahead and buy another pair just so its a matching set.

I don't care for the spoiler. Otherwise that is a BAD ASS car........Maybe bigger tires, and a different spoiler, and it's perfect...I even like the body kit

[Spiff325iS]

If you've got the room, rock 235's. Now there is some manly rubber, ha!

Looks good though. Rota Torque's? I almost put those on my saabaru.

Looks clean, but plastic bumpers would look loads better.

[Farbin Kaiber]

Those are Work.

[eyagel]

That's a nice "e46" you've got there.

[Erik]

Needs moar interfoolerzzz

[atomic]

G o... 245/35-17 only if you are really man enough though (need 8.5"+ to make them work) :up: