Announcement
Collapse
No announcement yet.
LS1 swap 318IS
Collapse
X
-
Oh cool, I've been considering this with the Garagistic sale. This review may put me over the edge...
Leave a comment:
-
More mini updates- I've been pretty loyal to condor for the majority of my brake and suspension parts as I like their parts and service, but garagistics had their 22mm front sway bar on sale for $100 and a local buddy of mine was planning to order one, so I had him throw a second on his order.
Untitled by Tyeler Andersen, on Flickr
This actually made a world of difference in the driveability of the car. It's always been tail happy and I didn't want to kill that off completely, which this didn't. It made the car very controllable on corner exit. I can actually lay the car into a nice and smooth corner exit skid without it trying to get away from me now. I'll leave it how it is for the next track day and reassess whether I want to add/remove rear sway, but on the street it feels great as is. Tip for guys like me that live in the dusty desert and get tired of having to grease your bars- teflon tape around the bar where the bushings ride lasts way longer than lithium grease and it wont attract dirt which seems to be the leading killer for bushings in my cars. Nice and quiet for a long time!
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
- Likes 3
Leave a comment:
-
Tried to tone down the exhaust a bit and failed Ordered 2 dynomax mini mufflers in hopes of just bringing down the decibels a bit without wrecking the sound of the car. I don't think it made it any quieter at all, but we'll see how it works under a load too. I also installed 2 more v-bands and flex pipes. Ive been meaning to do this since I built the exhaust and never got around to it. Trying to install the full exhaust as one piece is quite the chore and the flex pipes help line up at the heads as they did warp a little from welding and just heat in general.
Untitled by Tyeler Andersen, on Flickr
Also built some tips
Untitled by Tyeler Andersen, on Flickr
Just kidding, not those. This should help keep the soot off my bumper now. My buddy said it pops a pretty good flame out the back on high RPM decel so maybe this will keep the car from lighting on fire too.
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
- Likes 1
Leave a comment:
-
Originally posted by DEV0 E30 View PostHello fellow Phoenician!
Small upgrade over the weekend was replacing my 28lb stock LS1 injectors with some 42lb injectors. These are factory Grand prix GTP injectors that companies such as FAST sell as "upgraded". Found a guy selling a set of 8 from some wrecked GTP's and grabbed them. Will be perfect for the future cam swap and should be just enough for flex fuel!
Untitled by Tyeler Andersen, on Flickr
It's oil change time for the year for part of my fleet. Sadly half of this goes in the E30 and my montero alone as both hold 8qts of oil. I'm not an amsoil purist, but i am a dealer which gets me the same cost per quart as going and buying off the shelf castrol from walmart so I generally use this in everything. Dominator oil for track days, everything else usually gets XL and a 6 month- yearly oil change. There's enough here for 4 of my 12 vehicles...lol
Untitled by Tyeler Andersen, on Flickr
Track day next saturday, hoping to have everything ready to go by then!
Leave a comment:
-
Tires are in! Wheels are on! A couple pictures of the test fit went well. After lots of measuring, research and going back and forth on what I wanted to do I finally pulled the trigger on a set of custom forgestar F14's. I've seen one e30 with these and theyre on Vincent wong's, the owner of iForged wheels dakar yellow E30 M3. I use this same wheel on my C5, theyre light, nice looking, and most important- built to fit. I ordered them in 17x9 +26 square and the fitment is spot on with the offset changes due to the 5 lug swap. Shout out to modbargains too for these, the only dealer to actually get the ball rolling on my order and the quoted 8-10
week build time turned into 4 weeks on the dot!
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
A +30 square would've probably put me as dangerously close to suspension components front/rear as I'd feel comfortable with, but this gave me a little wiggle room without the need for spacers at all. These make my 330I brakes look small now too.
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
For tires I went with hankook RS4's this time. The amount of miles I put on this car heat cycles the A052's out quickly, so the RS4's will sacrifice a little grip for longevity.
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Have a few more mods along the way here and I should be set to just work on dialing in the suspension and driver mod full time.Last edited by tyeler18; 04-29-2021, 09:21 AM.
Leave a comment:
-
Originally posted by CubbyChowder View PostReally enjoyed reading through this thread while drinking my coffee this morning, love all the work you've put into it. That track looks so fun!
Leave a comment:
-
Really enjoyed reading through this thread while drinking my coffee this morning, love all the work you've put into it. That track looks so fun!
Leave a comment:
-
Originally posted by paynemw View Post
Can you take a close up picture of the hub nut & the threads... Just being anal.
irp,individual racing parts,irp parts,irp racing parts,drift racing parts,drift kit,irp short shifter,tuning parts,performance parts,drift suspension
Leave a comment:
-
Originally posted by paynemw View Post
If I'm digesting this correctly, You are using a sleeve to obtain a larger axle diameter on the stock e30 spindle, but what brand are you using and what hub are you using?
And you are using BMW e46 330i front calipers, but what rotors?
I asking for details, because I've always been interested in this and want to grow the knowledge base as much as possible. Thanks for the help in advance.
Fedex notified me my wheels are at my doorstep today, 5 weeks earlier than I was quoted for build time so I should have pictures this weekend!
Leave a comment:
-
Originally posted by tyeler18 View PostTo stay with e30 geometry IRP front 5 lug sleeves were ordered. DriftHQ sent e38 brembo adapters at first so I had to wait for e46 adapters to ship from lithuania.
Ran to the yard and grabbed 330I front calipers, 328I rears, and in a very lazy fashion added some color to them. I didn't spend much time since caliper paint doesn't last much longer than a 20 minute HPDE session anyways, but I felt good about how they turned out for now.
Rears are SRS concept adapters with Z4 hubs and condor let me order 4x e30 front brake hoses to do all 4 caliper hoses since the e46 caliper in the rear needs a longer hose. These worked perfect. Motorsports hardware 78mm stud kit to finish it all off.
And you are using BMW e46 330i front calipers, but what rotors?
I asking for details, because I've always been interested in this and want to grow the knowledge base as much as possible. Thanks for the help in advance.
Leave a comment:
-
Long time no update. Haven't driven the car in almost 2 months. I decided to pursue wider wheels a few months back and in the process wanted to go to 17's or 18's to improve the 245 tire options and cost since 16's are the oddball for 245's. Had a buddy buy my XXR's and I stuck my basket weaves back on to find one of my 2008 Date code tires had completely separated. Not wanting to spend money on new 195 tires (which are scary to drive with on this) I parked the car and started looking for wheels. 17x9 4x100 e30 offset wheels are quite the pain to find. I wanted to avoid spacers, and I didn't want to spend $2500+ on custom wheels. I finally decided to spend more going 5 lug and ordering custom 5 lug wheels instead
To stay with e30 geometry IRP front 5 lug sleeves were ordered. DriftHQ sent e38 brembo adapters at first so I had to wait for e46 adapters to ship from lithuania.
Untitled by Tyeler Andersen, on Flickr
These look better
Untitled by Tyeler Andersen, on Flickr
Ran to the yard and grabbed 330I front calipers, 328I rears, and in a very lazy fashion added some color to them. I didn't spend much time since caliper paint doesn't last much longer than a 20 minute HPDE session anyways, but I felt good about how they turned out for now.
Untitled by Tyeler Andersen, on Flickr
Rears are SRS concept adapters with Z4 hubs and condor let me order 4x e30 front brake hoses to do all 4 caliper hoses since the e46 caliper in the rear needs a longer hose. These worked perfect. Motorsports hardware 78mm stud kit to finish it all off.
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Swap went smooth other than one rear bearing fighting to come out. Had to weld the hub to the bearing and slide hammer it off after destroying the bearing cage trying to remove it. The rest came apart fine.
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Untitled by Tyeler Andersen, on Flickr
Z26 stoptech pads for now. Anything is better than the pads that were on the car so we'll see if these perform on the e30 as good as they do on my DSM's. I'll do a track day or 2 on them if they last and then switch out to PFC08's or similar for track pads. Wheels should be here end of may hopefully, I'm impatiently waiting for them to be built and I'd really like to drive the car again. I have an electronic booster at the house that I'm going to try and swap out with the hydroboost to hopefully eliminate the complexity of the hydroboost while I'm waiting for wheels. Wish I had dropped the car off for paint before immobilizing it but I didn't want to be 5 lug swapping next month when its 120F outside. More updates to come!
Leave a comment:
Leave a comment: