Another Not-an-E30 thread... The Worst Spec w201 16v, but I still have to save it

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • DEV0 E30
    replied
    Does it look like a need for speed car yet?

    If not, why?

    I need to live vicariously through your project cars because my progress is like going backwards now.

    Leave a comment:


  • roguetoaster
    replied
    Originally posted by 2mAn

    Might have to get the 4year old involved. She should be able to turn a key LMAO

    Stay tuned
    Okay Tony Angelo.

    Leave a comment:


  • MrBurgundy
    replied
    That's what they're for

    Leave a comment:


  • 2mAn
    replied
    Originally posted by MrBurgundy

    crank the car with one of the lines cracked on the distributor

    lmk what it does
    Might have to get the 4year old involved. She should be able to turn a key LMAO

    Stay tuned

    Leave a comment:


  • MrBurgundy
    replied
    Originally posted by 2mAn
    Thanks for the bump... heres where we're at: Fuel pump & fuel filter are installed (with no leaks) and working but still no start. I guess it’s time to move out from under the car and move under the hood. I’ve heard that I should check at the fuel injectors, but also heard I should check at the fuel distributor.

    Open to suggestions on what y’all suggest​.

    I should have finally the 16v motor ready to be shipped out this weekend and then the Benz is the only distraction besides the money thats burning a whole in my pocket.
    crank the car with one of the lines cracked on the distributor

    lmk what it does

    Leave a comment:


  • 2mAn
    replied
    Thanks for the bump... heres where we're at: Fuel pump & fuel filter are installed (with no leaks) and working but still no start. I guess it’s time to move out from under the car and move under the hood. I’ve heard that I should check at the fuel injectors, but also heard I should check at the fuel distributor.

    Open to suggestions on what y’all suggest​.

    I should have finally the 16v motor ready to be shipped out this weekend and then the Benz is the only distraction besides the money thats burning a whole in my pocket.

    Leave a comment:


  • MrBurgundy
    replied
    Bro can you start this thing up already?

    I need some excitement in my life

    Leave a comment:


  • MrBurgundy
    replied
    Be ready to take the fuel dist off. When they sit to long, the plunger will stick and dump gas like crazy.

    When you crank the car, take a 12mm wrench to the fuel line that goes to the distributor and crack it open. It should just weep out and not spray out. If nothing comes out, tap the line with the wrench because the flare might be seated still.

    If you you're getting the fountain of fuel, you're gonna have to take the dist off and try to free up the plunger or worse, split the dist and reseal it.

    Leave a comment:


  • 2mAn
    replied
    Had a small window to get under the car and cranked down on everything. Initial turn of the key didnt have fuel pissing. I got some fresh Chevron 91 octane & their Fuel Treatment. Will dump that in and see what happens when I turn the key.

    Guesses? More fuel pissing or fire it up MB reliability?

    Leave a comment:


  • varg
    replied
    Copper work hardens. When they've been crushed once they will be harder to "re-crush" and may not seal well. You can heat them with a torch to anneal them, copper is just easy that way. It's handy to have an assortment of copper and aluminum crush washers on hand when you own old cars...

    Leave a comment:


  • roguetoaster
    replied
    IMO, reusing crush washers is fine, if you sand them flat.

    I really would encourage you to get some cheap hook/loop no hole sanding discs and keep them around for stuff like this. They also work really well for sanding stuff that's semi fixed, like battery cables.

    Leave a comment:


  • 2mAn
    replied
    Originally posted by MrBurgundy

    I do those by hand. You can feel the washer collapse.

    Hang the pump in the hanger and then use 2 17mm wrenches to get that banjo tight
    ​

    I hate those copper washers, annoyingly the new pump had new washers, but they werent the right size, so my only option was to reuse and Im sure thats a big no-no...

    I will keep the car up on stands today while I tighten and see how many times I have to re-tighten them, but yea I might need new washers

    Leave a comment:


  • MrBurgundy
    replied
    Originally posted by 2mAn

    Maybe I should grab the CraftsThem and drag it back out and hammer that sucker on, just like it was before ... lol
    I do those by hand. You can feel the washer collapse.

    Hang the pump in the hanger and then use 2 17mm wrenches to get that banjo tight

    Leave a comment:


  • 2mAn
    replied
    Originally posted by roguetoaster
    Those fuel fittings always need crazy torque to seat the washers.
    Maybe I should grab the CraftsThem and drag it back out and hammer that sucker on, just like it was before ... lol

    Leave a comment:


  • MrBurgundy
    replied
    Craftsthem

    Leave a comment:

Working...