
You can also see my DD e30...
After playing around all day saturday in the Porsche, I started with pulling the old oil pan off Sunday morning

Pulled one rod bearing cap and one main bearing cap off to inspect the bearings and check the clearances. No pitting or odd wear found on any of the bearings and the clearances checked out perfect.
Then I tackled the good old oil pump nut.

Mine wasnt as loose as others have made it sound. Took it off and put red loctite all over it.
For extra insurance, I rolled the threads over with a hammer and punch. Im really not worried about it
Then started the re-assembly...Didnt think I need to take the bracket off from the old pick up but I was wrong, so I need to take the windage tray off again and do that. Also when I was putting my new rear main seal in, it went crooked on me and got all sorts of messed up. So a new one is on order. After that, m50 oil pan will go on, engine will get flipped back over and the head will come off. My parents agreed to hook me up with a VAC motorsports .140 MLS headgasket and ARP 2000 Headstuds for Christmas. Hoping to have all the engine/turbo components ready to install in the spring.


Leave a comment: