Story:
Bought from a VW guy, he needed money to finish the paint and body work on his Dub. So I made a deal and drove 6 hours total to get them.
Specs: BBS RS 137 5x112(was 114) ET45
I bought 1" lips for the front and 2" for the rear. Final setup is 16x8.5 and 16x7.5 ET +39 front +26 rear.
I have been working with a friend off of here and Mystikal for proper fitment and stance. I am going to be using 20mm adapters from Rob in the sale section on here.
Rim finish & hard wear:
I am in love with black, so I am doing the lips faces and center caps. I am polishing up the OEM BBS bolts and adding the chrome spike bolts every other one.
And the bolts are going to be one OEM and one spike, all chrome. Finished off with matching color finish flat caps to replace the fugly hex screw caps.
Pictures:
(Camera broke, only have MacBook)
Start of the build
Blocks of wood cut to give a rough idea of fitment including the larger lips and 20mm adapters.
Rear 2" fitment, looks spot on with a roll and pull.
1" lips just tapped on after the .5 was removed.
1" side shot
2" lips tapped on
2" again
Finished picture to show the steps.
Kingsport gray over black with plum barrels and chrome hardwear.
Bought from a VW guy, he needed money to finish the paint and body work on his Dub. So I made a deal and drove 6 hours total to get them.
Specs: BBS RS 137 5x112(was 114) ET45
I bought 1" lips for the front and 2" for the rear. Final setup is 16x8.5 and 16x7.5 ET +39 front +26 rear.
I have been working with a friend off of here and Mystikal for proper fitment and stance. I am going to be using 20mm adapters from Rob in the sale section on here.
Rim finish & hard wear:
I am in love with black, so I am doing the lips faces and center caps. I am polishing up the OEM BBS bolts and adding the chrome spike bolts every other one.
And the bolts are going to be one OEM and one spike, all chrome. Finished off with matching color finish flat caps to replace the fugly hex screw caps.
Pictures:
(Camera broke, only have MacBook)
Start of the build
Blocks of wood cut to give a rough idea of fitment including the larger lips and 20mm adapters.
Rear 2" fitment, looks spot on with a roll and pull.
1" lips just tapped on after the .5 was removed.
1" side shot
2" lips tapped on
2" again
Finished picture to show the steps.
Kingsport gray over black with plum barrels and chrome hardwear.
Comment