Phase 2: search for more power

[trackjunkie21]

shoot me a link. i'd like to get these for the vert.

sent the link to your Facebook.

Nice build so far! I cant wait to put my TMS chip in.. running on stock right now.

Wish my cluster lights and temp gauge work :(

Do it, it makes a world of difference! The gauge is easy to diagnose, it's only 1 wire! check the coolant temp sensor in the head.

[cmybimmer]

sent the link to your Facebook.


Do it, it makes a world of difference! The gauge is easy to diagnose, it's only 1 wire! check the coolant temp sensor in the head.

Yeah Ive been told to check the temp sensor.. I was going to do a full diagnostic when winter break comes around.

PS: What tranny are you using?

[trackjunkie21]

Yeah Ive been told to check the temp sensor.. I was going to do a full diagnostic when winter break comes around.

PS: What tranny are you using?

G240, holding up well for now.

[Butler]

Dude you car has come so far. Nice work with swap!

I wish I could have given you some advice before you wreaked your glove box... There is an easy way to break into them with out breaking them!!!
From the passenger side toward the drivers side slide a really long flat head screw driver in between the dash and glove box. Once its in you have to guiding it until it touches the side of the locking mechanism and disengages the lock. Pretty simple actually. The first time is always the worst.

What ever.. you got a new one and now its old news. haha

[trackjunkie21]

Dude you car has come so far. Nice work with swap!

I wish I could have given you some advice before you wreaked your glove box... There is an easy way to break into them with out breaking them!!!
From the passenger side toward the drivers side slide a really long flat head screw driver in between the dash and glove box. Once its in you have to guiding it until it touches the side of the locking mechanism and disengages the lock. Pretty simple actually. The first time is always the worst.

What ever.. you got a new one and now its old news. haha

Wow haha

Anyways finally picked up a a medium case diff, 3.73 to be exact because I think the small case is finally on it's way out, started whining a week or two back and started to sweat fluid. Picked up this 3.73 locally from a guy who wrecked his 325is, 121 thousand on the diff and has a brand new bushing!

[trackjunkie21]

Well this was week was full of research on what wheels would clear the Mazda Calipers, I'll just say that I'm very happy and new wheels are in the works for before the new year.;) Will not disclose just yet.

[freeride53]

Good work mah nigga! :D

[trackjunkie21]

Good work mah nigga! :D

Thanks, you'll like my choice;) BTW when are you getting something bigger? All you need is a set of wheels to set your car off!

[freeride53]

Thanks, you'll like my choice;) BTW when are you getting something bigger? All you need is a set of wheels to set your car off!

IDK, I got back home from college and my car's running lean as fuck, failed smog, and the engine can overheat at any moment due to a broken fan clutch and torn hoses. The only reason it hasn't blown yet is since I drive fast and it cools the engine hahaha

[trackjunkie21]

IDK, I got back home from college and my car's running lean as fuck, failed smog, and the engine can overheat at any moment due to a broken fan clutch and torn hoses. The only reason it hasn't blown yet is since I drive fast and it cools the engine hahaha

Time for elec. fan, FFD fan is wonderful on my swap car. or get a Volvo fan wired up.

[ahriley91]

Radiator fans are overrated. Lolz

[acolella76]

just don't stop and you won't overheat

[trackjunkie21]

In New York, you never move, so a fan is a must lol

[acolella76]

that's what sidewalks are for. lulz looking good so far I like peeking into this thread every now and again.

[trackjunkie21]

that's what sidewalks are for. lulz looking good so far I like peeking into this thread every now and again.

Thanks, don't stop because the car is nowhere near finished yet!