So work was slow today and of all the ideas in my head, this was the cheapest and easiest. I drive a lot of highway miles, so I figured I would take advantage
First I removed the drivers high beam, I cleaned the light holder and repainted the bezel
Next I fit some dryer duct I bought to the existing intake box tube
Then fit and centered to tube in the hole where the headlight had covered
I installed the light holder and made sure everything fit
Then the final touch, I cut some screen and fit it between the bezel and holder
Total cost : $3.74 plus household scraps and paint
First I removed the drivers high beam, I cleaned the light holder and repainted the bezel
Next I fit some dryer duct I bought to the existing intake box tube
Then fit and centered to tube in the hole where the headlight had covered
I installed the light holder and made sure everything fit
Then the final touch, I cut some screen and fit it between the bezel and holder
Total cost : $3.74 plus household scraps and paint
Comment