Alpina B6 3.5 Turbo Tribute

[e30m3s54turbo]

Thanks guys! Installing a e21 wind shield resevoir. I will rap it with some kind of heat shield. So turbo will not melt it. I found some wires I had fix.

[robgoesvroom]

have a spare M30B35 for sale? I'm looking for one!

[e30m3s54turbo]

I finally pulled the motor out to rebuild to it. I might have the head ported & polished with 1mm. bigger valves. I want to a 292 cam , custom rods & pistons from Ireland Engineering. I might pull the trigger on this. I have some pics of the engine & bay. I need trim metal in the bay for the turbo manifold.

[efficient]

sick!!!

[F34R]

Too much win in this thread! looking great

[e30m3s54turbo]

sick!!!

Too much win in this thread! looking great

Thanks guys. This car is going to be my hot rod.

I bought two German obc for my car. I was going use the 13 button obc. Know I can't use it any more because I'm going run mega squirt. I bought a German 6 button.



I bought longer bolts for the e36 m3 rack. I want the rack to be level with the sub frame. When I had motor in the car the oil pan was touching the rack. I was using 325 e30 rubber mounts Alpina B6 3.5s metal motor mounts.

[02Wrxdriver]

Very nice!

[e30m3s54turbo]

Very nice!

Thanks. I see you have wrx. I have 04 sti.
Well did get the rack almost level with sub frame. Know I need to extend the steering knuckle.

[ILoveMPower]

Keep bottom end stock, get a nice HG and some head studs and crank the boost. I run the IE 284 cam in my N/A M30 and it brings the powerband up top nicely

[e30m3s54turbo]

Keep bottom end stock, get a nice HG and some head studs and crank the boost. I run the IE 284 cam in my N/A M30 and it brings the powerband up top nicely

I am thinking of keeping the bottom stock. I do want to do head work on it an send it to Ireland Engineering.

[F34R]

Why are you spacing out the steering knuckle?

[e30m3s54turbo]

Why are you spacing out the steering knuckle?

I pushed down the e36 m3 rack down a 1in. Now I have to take the some washers out for steering knuckle to fit like a stock e30 rack.

[F34R]

Got ya

[02Wrxdriver]

Thanks. I see you have wrx. I have 04 sti.
Well did get the rack almost level with sub frame. Know I need to extend the steering knuckle.

I noticed the 04-05 front end in the background. Wasn't sure if it was a WRX or a STi. Again very nice build and I love your attention to detail. If your going to do it, do it once and do it right. Keep up the great work.

[e30m3s54turbo]

I noticed the 04-05 front end in the background. Wasn't sure if it was a WRX or a STi. Again very nice build and I love your attention to detail. If your going to do it, do it once and do it right. Keep up the great work.

Thanks.