Supreme ultra stupid stance slam and other fad words Build - 2012

[Mr. Tasty]

how do you like the 350z driving wise?

[CHIF8008]

love the build mate

[kunt_masha]

how do you like the 350z driving wise?

i love it!



It was really smooth as a daily driver stock, but is a bit more harsh now...


For drifting it is awesome but these cars squat and dig a lot so you can accidentally get into some high speed drifts.

[kunt_masha]

16.




I am coming out of my winter depression and decided to stop fiddling with the Z... updates finarry!!


Mocked up my guages and finished my harness :buttrock

innovate LM, boost, oil PSI, oil temp









Then I FINALLY got the right parts after weeks of receiving the wrong sh!t... wrong TOB, wrong flywheel bolts, wrong pressure plate, missing bellhousing flange plate, etc, etc


bought a sachs organic sprung clutch, all new hardware, LTW flywheel and pieced it all together.. My only concern is that the E34 pan doesnt have a baffle. Any concerns????



Engine mounted with my polished alternator :shifty










tight squeeze... need to touch up some paint but this is the only scratch






Then mocked up my cooler but I need to weld in some different mounts

[sharky]

FYI I didnt use the AA bracket for the cooler, mounted it directly to the rad support. looking good bud!

[kunt_masha]

FYI I didnt use the AA bracket for the cooler, mounted it directly to the rad support. looking good bud!

Good call!


I am going to mount the mishi rad and bumper to see where it should really go. The AA mount is pretty sh!tty really.

[ak-]

Awhh.
This is natural camber right?





Super fun build.

[freeride53]

This car ... jizz ... literally :D

[kunt_masha]

Awhh.
This is natural camber right?

the rear is not adjusted but the front has plates.

I am going to switch to GC's soon though

[Cronopoulos]

Great work thus far!

[kunt_masha]

17.



working on it slowly every day after work... wiring is my least favorite thing in the world


I really wish I left the harness intact but I am forced to finish it now :(









I also received a bunch of crucial fire starting pieces











803 MAF





stupid expensive traction fluid... i put off buying this for months because its hard to justify $100+ per qt.









but sadly I got distracted and stopped wiring to fool around with this pile

[Vivek]

Slightly OT, but wouldn't you want to not tape your fender so you can see if the paint's cracking? Also, the fender roller shouldn't touch anything on the outside of the fender, right?

[kunt_masha]

That was actually my last step.. I use a heat gun and roll the fenders but the paint on the inside edge almost always chips.


Nissan paint is really cheap too. After I am done rolling I tape out the outside and spray some paint inside the wheel to make sure nothing rusts or keeps chipping

[dnick]

i always get excited when i see a new post from you on this thread.. keep it up mayne, its lookin great!

[ak-]

i always get excited when i see a new post from you on this thread.. keep it up mayne, its lookin great!

lol I was going to post the same thing before I saw your post.