91' 318is S52 Swap "The Beast"

[Danny]

Thread the clevis so that you have some play in the brake pedal. I know you say "I don't know how its supposed to feel" but just try it and see if it works.

[craiggroves91]

Thread the clevis so that you have some play in the brake pedal. I know you say "I don't know how its supposed to feel" but just try it and see if it works.

Not sure what you mean by play in the pedal?

It will move forward and back slightly?

[Danny]

Yes, that is generally was play would mean. I really think you're clevis is adjusted in correctly. Janderson had the same issue with his car.

[craiggroves91]

Yes, that is generally was play would mean. I really think you're clevis is adjusted in correctly. Janderson had the same issue with his car.

Thats what I'm thinking too!
They are locked up slightly then when I drive they warm up and lock worse and worse.
I'm going to play with it when it clears up outside

[mtlbloodshot]

Ohh just letting to you know, I cut off that little black box in the bay.

[craiggroves91]

Ohh just letting to you know, I cut off that little black box in the bay.

Hmm maybe I'll ditch mine!

[craiggroves91]

OKAY! so its pretty much most definitely something with the linkage, whether its the pedal adjustment, something installed wrong, something missing, etc.

I know this because I unbolted the MC nuts and slowly the brakes started freeing up and bam I can push the car with my pinky!!!

I'm going to try to adjust the pedal with the MC off to try to see when the rod is pushing and isn't pushing. If that makes sense. I'll let you know how that goes.

[craiggroves91]

Something is definitely not right and I have no idea what it is.
It seems like the booster needs washers on its studs to space it out.

the only time they are remotely freed up is when I screw the rod all the way into the pedal and even then they stick a little. The pedal is closer to the firewall then the gas pedal.

This makes no sense cause everything is factory and should be there.
Maybe something is missing where the rod pushed on the master? Everything seems to be there

[benyen soljax]

Awesome thread. Wish I could help with the brake issue, but I just got my e30 the other day :/

[mtlbloodshot]

I don't know if you need this or if it has anything to do with your problem, but I used this when setting up my E30 clevis on a AUDI A4 booster.

[craiggroves91]

I don't know if you need this or if it has anything to do with your problem, but I used this when setting up my E30 clevis on a AUDI A4 booster.

I'll try that again, but I think its something else.

[tehwickerman]

fuck yeah dude! can't wait to do this to my 318. well done!

[craiggroves91]

Awesome thread. Wish I could help with the brake issue, but I just got my e30 the other day :/

Thank you!
It's all good, I'll figure it out eventually

fuck yeah dude! can't wait to do this to my 318. well done!

Thanks!!! Do work!

[Thrizzle]

It sounds like your pushrod isn't lined up.

When doing my install I accidentally clipped the pushrod onto the wrong side of the pedal arm. It was weird because it looked like it was meant to be there. Anyway just a thought, get in there and check it out.

[craiggroves91]

It sounds like your pushrod isn't lined up.

When doing my install I accidentally clipped the pushrod onto the wrong side of the pedal arm. It was weird because it looked like it was meant to be there. Anyway just a thought, get in there and check it out.

You mean the clevis and pin on the pedal might be in the wrong spot?