Announcement

Collapse
No announcement yet.

NPulver's E30 build...$400 car.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #76
    Starting the reinstall process, this is the part i hate...lol.

    This is as far as i got in the hour and a half i had. Wires under the cluster 95% hooked up, cluster in, modules in, and some trim back on. I guess we'll see when i get at it again as there is a chance of rain for the next 3-4 days i hear.

    My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
    And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

    Comment


      #77
      Originally posted by Npulver View Post
      the 16x8.25's are + 0 offset. The 17x9.75 are +25
      oh so you have the 16x8.25 in the front and 17x9.75 in the rear? when you talked about the sizes earlier in the thread it was kind of confusing. nice fitment though. i didnt realize they were 1.5" staggered with such a large difference in offset.
      1989 E30 Zinnoberrot Vert 325i OBD1 S52 turbo;IP

      Comment


        #78
        Sorry for the confusion. I'm currently running a square set of the 16's, the 17's are the set I test fit. I just mentioned both to cover my bases.
        My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
        And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

        Comment


          #79
          great build ! REALLY like the color.. and stance is nice too. keep it coming!

          Comment


            #80
            Great build. Interesting approach to dash repair. Never heard of that. Keep it up :up:
            91 318is M50 swapped
            05 Honda Pilot

            24V swap thread
            http://www.r3vlimited.com/board/showthread.php?t=302524

            Comment


              #81
              well i finally got some stuff done and got 95% of the interior back in, and it runs again. Right before this went down a few weeks ago i had intended to do a tune up on it, well, looks like today is the day for that perhaps.

              really wish the steering wheels wasnt hashed, dont really mind the cover, but would rather have my interior completely match...oh well, when i get ride of the SRS i'll get a new steering wheel.

              My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
              And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

              Comment


                #82
                Cars looking sweet dude!
                1989 Australian Delivered 325iS Mtech 2.
                Fully worked M20B31 stroker. 143kw atw/285ntq atw.

                Comment


                  #83
                  Went to a clay bar/ wax party with a bunch of local car guys did a full cut and buff on the bmw. Turned out pretty well i think (minus the fact you cant fill in paint or unpop dents while doing it.)








                  well enough you can see clouds in my paint.

                  also ran into a guy i know...(we were at his house lol) with a certain beefed up mustang.



                  1000whp+....yumm

                  my buddy petes car was there to 2011 subaru sti that is also stanced (he's making just shy of 500hp i believe right now) can see his car in the garage in one of the photos.

                  My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
                  And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

                  Comment


                    #84
                    Dat Mustang :bow:
                    Bronzit 4-door Swap Drifting somewhere
                    Cammed B25 Swap Daily Driver
                    Updated 10/1

                    Originally posted by StereoInstaller1
                    Maybe 300 CANADIAN HP, thats like 225 US HP.

                    Comment


                      #85
                      just picked up another car to go along with this one. Same color (close) and also in pretty darn good shape with very minimal rust!

                      74' 2002 Tii!






                      My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
                      And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

                      Comment


                        #86
                        I'm loving all of the cool 2002's on here lately. Was it as good of a deal as the e30?
                        S50'd

                        Originally posted by TDE30
                        What is this faggy shit I have happened upon?
                        Originally posted by slammin.e28
                        I can always live in a M3. Can't M3 a house.

                        Comment


                          #87
                          Originally posted by Lof8 View Post
                          I'm loving all of the cool 2002's on here lately. Was it as good of a deal as the e30?

                          it was even better ;)
                          My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
                          And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

                          Comment


                            #88
                            Just got back from the drift event practice (thanks guys for putting it on!) Two things i learned. I suck, this bmw is not forgiving.

                            My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
                            And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

                            Comment


                              #89
                              This thread is now 100x better, it now has race/drift pictures!







                              The Fotomotive guys are awesome! Glad they were able to get some shots of my car. If you want to see more pics from the event check out there website!

                              www.FOTOmotiveSD.com or there facebook! http://www.facebook.com/FOTOmotive

                              Give them a shout out if you have some time, there up in comers in the photography world. They also have a spread in the magazine Japanese Performance. (the white STI thats on the cover thats a local boy)
                              My Build Thread Here (E30) ---> http://www.r3vlimited.com/board/showthread.php?t=240528
                              And Here (2002tii) ---> http://www.r3vlimited.com/board/show...35#post3173435

                              Comment


                                #90
                                This car is awesome. colour. stance. And i dont care what anyone says about XXR wheels, they look so good on this car. very nice job!
                                sigpic
                                Delphin '87 325i Vert

                                Comment

                                Working...
                                X