TheTacoMan's build, Turbo'd, mflare'd.

[TheTacoMan]

[TheTacoMan]

Spark plug ended up being ok, threads were still there.
Turning the boost up to 11psi, tried to about an hour ago but the boost controller wasn't working properly.
Im hoping to be close to 300whp with 11psi, If not ill have to get some 60lb injectors and just go up :D

[TheTacoMan]

Summit carries a kit thats for m14x1.25, I am going to give that a shot.
If this head is unfixable I might save up for a new mystery e head or build my own.

Front right wheel bearing is pretty dead too. Fix one issue and on to another issue.

Just got ground control coilovers on too. :(((((((((((((((((

[kamotors]

time-sert

[Dj Buttchug]

what's the fix for that?

try and chase the spark plug threads/ retap or swap heads.

[thatphysicsguy]

what's the fix for that?

[Dj Buttchug]

Of course right when all leaks are fixed, and Im done breaking in the clutch I blow out a spark plug. Threads are probably stipped.

Damn

:(

[TheTacoMan]

Of course right when all leaks are fixed, and Im done breaking in the clutch I blow out a spark plug. Threads are probably stipped.

Damn

[rmosca594]

Well, since big tires rub I need some adjustment.
So Gc coilovers are coming as well as some Condor speed shop lollipop bushings.

Hell yeah man its looking great! I also am buildiing for boost! I absolutely cannot wait :D I subscribed to this one!!!

[TheTacoMan]

Well, since big tires rub I need some adjustment.
So Gc coilovers are coming as well as some Condor speed shop lollipop bushings.

[TheTacoMan]

I got them used from str directly, Got them for a smoking deal. :D

Getting some new paint in the engine bay and also smoked my tail lights. A bit dark, may have to wet sand them.

[chondamx]

Cars coming along nicely! Where did you end up buying your wheels from?

[TheTacoMan]

Oh got it, good luck with that. Are you gonna try to upgrade the sway bars? or just fix the mounts and put stock sways back in?

Im going to upgrade sway bars, I need the extra stiff.

[thatphysicsguy]

Oh got it, good luck with that. Are you gonna try to upgrade the sway bars? or just fix the mounts and put stock sways back in?

[TheTacoMan]

So beautiful!

But with the herrafrush is the handling kinda sketchy? Or did you already have zero suspension travel to speak of when you were running the TRMs?

I had good travel with Trms, That stupid broken sway bar mount is making my car lower. Rubbing is minimal even being stupid low on huge tires.
Im getting a new sway bar, getting in reinforced and some street camber plates to raise it 1/8" and to give me a bit better clearance.

I rubbed with 225/50/15s because of that broken sway bar issue that I just found.



Tight clearance as you can see