Mazda 3 Rotor E30 Project

[3rotore30]

edited.....

[Massimo]

I really want to make the rotary fit.

I'll try a 12a front cover and a front engine mount, not ideal but hopefully it will work for me... Heading away for work soon anyway so wont be any updates for a couple of weeks.

I am sure you will find a way bro. If you were in SA I would offer you some help to get that bitch in there.

[Clark954]

You son of a Bitch

Well since your in a diff country ill let it slide, my 13b turbo II E30 is mounted ready for piping and drive shaft, and some last minute odds and ends

Its not easy by any means, oh and I hate you

[Clark954]

13b's are boring, sound shit and don't make the torque the 20b does.

that's an interesting set up with the control arms and steering rack. still really want to use the 20b but don't really care at the moment. the main issue for me is getting the engine to sit low enough in the engine bay, EVERYTHING is in the way. i don't want to front mount the block either as it will crack the end plates. i have to retain the standard engine mount location on the 20b to be able to use it. i really really want to keep the auto too and even that hardly fits as it is...

yes, 1gzfe. will see how it fits in the bay and report back when the rain clears.

you sir are high, the 13b is just fine. but good luck with the 20b if i had the money and shop available then id probably do the same but the 13b is working just fine for me and scares plenty of people

[Massimo]

Bumpy

Are you back yet? I fucking want updates....

[AwakenNoMore]

I see no pics of a glorious 20B in an E30. "Where's the beef?"