Announcement

Collapse
No announcement yet.

e30 Turbo from BAHRAIN

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    e30 Turbo from BAHRAIN

    Hey guys, I'd share my build here

    Lets start :)

    This is my 4dr e30 325i 1991 turbo project

    First time I got it











    Then after along time and mods, turbo time comes and this is how it was started


















    Car started and run fine, but now the time has come for upgrade and take out the shitty AFM and factory ecu

    But the engine bay was needed to be some way different :)











    Paint job ...









    Some minor things :p












    Still I have many things to do, the most important is to get it tuned ;)

    Sorry for long and for my bad English :(

    More details:


    M20B28 Turbo

    My Build Thread

    http://www.r3vlimited.com/board/showthread.php?t=255839

    #2
    at first i was like, wow big snail might have issues with hood closing, then i was like whoaaaa look at this paint. then i was like coooooool beans!

    that e30 never saw better days!:o

    post up your numbers when u get it tuned...



    this pic PLUS OR MINUS BOOST BUTTONS FTW!!!

    my build here ---> http://www.r3vlimited.com/board/show...ht=lemans+blue

    Comment


      #3
      Came out nice mashallah. Keep it up !
      Sticky:True e36 one touch windows DIY

      1990 M3
      1992 Mtech (S50 + 5 Lug)

      Comment


        #4
        Beautiful car but im not sure about the fart can

        Comment


          #5
          amazing car man! More details about the paint job!

          Comment


            #6
            Originally posted by henna 3ree View Post
            Beautiful car but im not sure about the fart can
            Fart can - noun: noisy muffler on mostly factory vehicle. Usually accompanied by cold air intake, spoiler, automatic transmission, etc.


            With a turbo you need as free flowing as you can get. Its just a straight through 3" exhaust.

            boost on brew

            Comment


              #7
              Thanks guys,

              Car is really loud but it's performance is very well with this exhaust..

              Unluckily, that turbo manifold in the picture sold so I went homemade manifold adapters for now..

              Hope by the end of august I finish it all with a dyno tune


              M20B28 Turbo

              My Build Thread

              http://www.r3vlimited.com/board/showthread.php?t=255839

              Comment


                #8
                Nice build bro , u encouraged me to start mine soon ,
                What are u using for Management,I know its too hot in Bahrain , BMWs suffers there from Heat , so did that had any effect on ur project

                Comment


                  #9
                  Yeah it's very hot but I've never had any heat problems with my car, it's always at the quarter mark :)

                  I'running 1JZ-GTE wiring with Apexi S-AFC I, I know it's something not common here but it's much more better than the stock ecu with turbo chip and rrfpr and so on..


                  M20B28 Turbo

                  My Build Thread

                  http://www.r3vlimited.com/board/showthread.php?t=255839

                  Comment


                    #10
                    Mashallah Ali

                    1991 BMW 318i (Old Shell RIP, Now Being Re-shelled & Reborn)
                    1983 Peugeot 505 STI
                    1992 Volvo 240 Wagon
                    2009 Toyota 4Runner SR5 Sport 4WD

                    Comment


                      #11
                      New update, 2.5" aluminum IC piping



                      Hope to be fixed by the next week...


                      M20B28 Turbo

                      My Build Thread

                      http://www.r3vlimited.com/board/showthread.php?t=255839

                      Comment


                        #12
                        Nice car..

                        How is the heat ..... do you have problems,, as the temp in Bahrein is well above normal
                        Sveinbjörn Hrafnsson

                        E30 CABRIO V12 M70B50 ///
                        ALPINA B10 BITURBO 346 @ 507
                        E34 550 V12 JML


                        Finnish wisdom : If you want to Win,, hire a Finn

                        http://alpina.123.is/pictures/

                        Comment


                          #13
                          ^ My temp gauge never goes above the quarter mark except in the high load it rises near the middle :)


                          M20B28 Turbo

                          My Build Thread

                          http://www.r3vlimited.com/board/showthread.php?t=255839

                          Comment


                            #14
                            New update, BBs time :)





                            They still needs some hard cleaning + new tires to be perfect


                            M20B28 Turbo

                            My Build Thread

                            http://www.r3vlimited.com/board/showthread.php?t=255839

                            Comment


                              #15
                              Wheel needed to be modified a little ...



                              & spacesr ..



                              Here it is :)



                              New tires are in the way


                              M20B28 Turbo

                              My Build Thread

                              http://www.r3vlimited.com/board/showthread.php?t=255839

                              Comment

                              Working...
                              X