My 88' e30 325i Touring build thread, wiretucked, ITB'd M20, Bagged.
Collapse
X
-
I was reading what you did for the PCV with the AN lines. So you're saying that the welder didn't actually weld in the AN male adapter to the valve cover, but more like JB welded it in? Then you took that hose to a catch can and ran fuel pressure off the catch can? -
FINALLY it is coming out lol
I did the shoot for this in December 2015. Back with my old Work Emitz and when the car was barely running using the older Microtech ECU... Oh well, better to come out late than never come out at all.
by USDMem1, on Flickr
Leave a comment:
-
I have relocated it under the LHS lower front corner of the engine bay, sort of under the headlight. I attached a hose that comes up into the bay so that I can top up the tank, the hose sort of tucks away on top of the headlight to stay out of sight.
Yep, exactly. At this stage I'm just focused on maintaining it. Keeping it driving and keeping it clean lolLeave a comment:
-
Nice feature Mike - good to see the car still out on the road after some years.
I can relate to the kids and houses slowing down the funds & motivation for further mods!Leave a comment:
-
Pretty proud of this.
Recently had a feature on Ultimate Klasse :)
Photography by Jackson Keam & Ollie Strong @hardparkedproductions Mike Hack's fondness for the E30 platform all started when he bought a 318is coupe. He had intentions of keeping it clean and stock since his daily/track Honda Civic was deemed "un-roadworthy" by the local police
Leave a comment:
-
-
Thanks guys.
I really need to get back on these forums. I barely check them anymore...Leave a comment:
-
Nice touring, like the custom stuff. Makes the car look all that much better :)Leave a comment:
-
-
Leave a comment: