My 88' e30 325i Touring build thread, wiretucked, ITB'd M20, Bagged.

[bmwandhonda]

Gave it a clean tonight. Unfortunately found that the rear left wheel has been guttered bad while at the workshop. I called them, they are going to sort it out.

It looks like it has been guttered and then patched up with a touch up paint, so whoever did it, knows they did it and tried to hide it. I trust the guys at the workshop, but it was towed back and forward to an exhaust place and a specialty auto electricians place. Could of been them, or most likely the tow truck driver while loading or unloading the car, who knows... Either way will get it sorted soon enough.



Ballislife

[bradnic]

happened to my friend's 355 Ferrari - tie down straps during transport gouged 2 rear wheels badly.

[bmwandhonda]

happened to my friend's 355 Ferrari - tie down straps during transport gouged 2 rear wheels badly.

damn that would not be a cheap fix :/

[bmwandhonda]

IMG_7073 by USDMem1, on Flickr

[bmwandhonda]

IMG_7076 by USDMem1, on Flickr

IMG_7093 by USDMem1, on Flickr

IMG_7094 by USDMem1, on Flickr

IMG_7097 by USDMem1, on Flickr

IMG_7098 by USDMem1, on Flickr

IMG_7101 by USDMem1, on Flickr

[bmwandhonda]

IMG_7117 by USDMem1, on Flickr

IMG_7121 by USDMem1, on Flickr

IMG_7132 by USDMem1, on Flickr

[318aye]

Great shots. You really handled the details well.

[Shftr8]

damn your car always makes me motivated to finish my white mtech2 touring

[bmwandhonda]

Great shots. You really handled the details well.

Thanks mate, the iphone6 does alright sometimes. I need to learn how to use a 'proper' camera and get some better shots though.

[bmwandhonda]

damn your car always makes me motivated to finish my white mtech2 touring

Get to work mate haha

[Shftr8]

haha I am just waiting on parts now. rebuilt s54 is sitting on the stand and the harness, subframe and oil pan should be done soon. then off to paint

[318aye]

Thanks mate, the iphone6 does alright sometimes. I need to learn how to use a 'proper' camera and get some better shots though.

Lol I meant on the car. I know fuck all about photography.

[bmwandhonda]

haha I am just waiting on parts now. rebuilt s54 is sitting on the stand and the harness, subframe and oil pan should be done soon. then off to paint

Nice man!!

Lol I meant on the car. I know fuck all about photography.

haha whoops. Yeah same.

[brett_duenas]

Im interested in knowing more about your AN fitting fuel system. What fuel pressure regulator did you use? Did you run the braided hose all the way to the tank? More pics please?

[bmwandhonda]

Im interested in knowing more about your AN fitting fuel system. What fuel pressure regulator did you use? Did you run the braided hose all the way to the tank? More pics please?

Hey mate, I just went out and took a few shots of the system. It's a pretty basic setup really, but works well and cleans up the bay nicely.

I have just run -AN6 lines to the stock hardlines on the firewall. So I haven't run all the way back to the tank/pump. the pressurised line to the fuel rail, which loops back around to the reg, then from the reg down to the return/drain line. I'm using the 'Nuke Performance' fuel rail which comes with -AN8 (if i remember right) threaded ends. So just used a reducer in order to run -AN6 hose.
IMG_7379

I am using a 'Hybrid Racing' fuel pressure regulator. (Hybrid racing make Honda kswap parts, my old civic was sponsored by them a few years ago) but the fuel reg is universal, so it does the job.
IMG_7381

180degree fitting
IMG_7383

Nuke railIMG_7384