Announcement

Collapse
No announcement yet.

My quick DD build.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Yeah, I remember. Luckily, it wasn't me who hacked the shit out of it.

    Car is coming along nicely. Should be a sweet little daily when it's all done.
    '70 911s | '72 2002 | '88 M5 | '89 330is | '89 M3 | '95 911 | '02 M5 | '04 RR HSE

    Comment


      #32
      So it took all morning to fix my friends stupid honda, but I got home and and managed to get most everything put together on the rear, and after looking at it on the ground I think I'm going to remove the rear spring pads and put the fronts back in.




      sigpic

      Comment


        #33
        nice work

        Comment


          #34
          Just a quick update, I'm working swing shift now so when I get home around 1am I only have a few hours a day to work on the e30 if I'm not to tired. I'm shooting for this weekend to be driving again, then I'm just waiting on some small stuff so I can finally use this for a DD.

          I finished everything under the car except the fuel filter and removing the rear spring pads. So tomorrow after that I'll be putting the head back on. I'm getting excited to start going to local meets again.
          sigpic

          Comment


            #35
            Nice! Car is looking good and it's been said before but ill say it again. You work quick. Be sure to stop by the Garage next time you're in the area. Bring some of that iced tea. ;)

            Sent from my LG-P999 using Tapatalk 2
            clutchCTRL!
            Move with a purpose.
            - 1991 325iX 4dr/5spd
            - 1976 2002 SlickTop/2.7i M20/G260
            - 2000 323i AT
            2016 Mazda CX3 Sport AWD

            Comment


              #36
              Getting close now. I didn't get started as early as planned. Had to fix a friends laptop and slept in a little to late. I figure Wednesday ill be done and I can drive this weekend.




              Sent from my C771 using Tapatalk 2
              sigpic

              Comment


                #37
                Fast work! I'm impressed.

                If you can, post up an exhaust clip whenever it's all back together. I've got a straight pipe set up with the stock exhaust and was wondering what it'd sound like with a different muffler.

                Comment


                  #38
                  Originally posted by Andy348 View Post
                  Fast work! I'm impressed.

                  If you can, post up an exhaust clip whenever it's all back together. I've got a straight pipe set up with the stock exhaust and was wondering what it'd sound like with a different muffler.
                  Oh I plan to.

                  Even closer I'm on target for Wednesday.


                  Sent from my C771 using Tapatalk 2
                  sigpic

                  Comment


                    #39
                    Great work! Car looks awesome
                    1988 325 Lachs Sedan SOLD

                    1989 325i Bronzit Beige 2 Door
                    SOLD

                    2018 Volkswagen Alltrack SE DSG
                    Past:1988 325iS Lachs 5 Speed

                    Comment


                      #40



                      Cleaned up my vacuum lines, got the maf,exhaust, basically everything installed but the radiator, went for a test start and nothing, my fuel pump took a shit so im waiting on that to come in and then im good to go.
                      Sent from my C771 using Tapatalk 2
                      sigpic

                      Comment


                        #41
                        Been driving for a month now, dealing with miller right now about a maf issue. It's causing me to idle high and run rich. Once it's resolved ill probably go megasquirt like I should have. Going to have a luke box installed this month. Also installed my smiles with hids. Getting close now.

                        Sent from my C771 using Tapatalk 2
                        Attached Files
                        sigpic

                        Comment


                          #42
                          Dyno165hp/164tq.

                          Long story short I had the wrong cam put in the head so the tune could be messed up because of that. Pulled of the head and now I'm putting it back together with the right cam. If my exhaust gaskets get here from blunt tomorrow ill be driving by the end of the night. I decided to start squeezing out all the hp I could from this head. Look at all the extra gasket material on the inside of the intake, it shows just how much porting was done.

                          Sent from my C771 using Tapatalk 2
                          Attached Files
                          sigpic

                          Comment


                            #43
                            Haven't posted in a long time, here's a little teaser of what's to come and a pic I took on the way into the store.



                            Last edited by e30Rooster; 09-19-2013, 03:14 AM.
                            sigpic

                            Comment


                              #44
                              Your head ported? cause my gaskets have a bigger opening then my head

                              Sent from my GS4 Active
                              '91 318i (Alpine) - daily
                              '88 325ix (Zinno) - drive here and there!

                              Comment


                                #45
                                Originally posted by fresh_TD View Post
                                Your head ported? cause my gaskets have a bigger opening then my head

                                Sent from my GS4 Active
                                Oh yeah it's ported:D
                                sigpic

                                Comment

                                Working...
                                X