Touring M52B28 (another one from Ireland)

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jozi
    replied
    One of those moments where you think "why did I start this"....



    Doesn't look bad but it's rotting from the inside and not easy to clean the welds if you just chop out the drain so it was decided to replace the whole sunroof tray. Rot on the inside of the tray:



    Donor panel from the old touring highlighted in red



    Little bit of surface rust on it but otherwise very clean! Rust was treat on both the roof skin and tray, primered and painted before being bonded and welded back in place.

    Christmas pressents

    Not a fan of DTM style pipes so got new straight ones from Scorpion, the hoses are made to fit the E46 rack I'm fitting, and heated mirrors.

    Small mod to the front valance to fit 2 grill vents, which will hardly be visible with the tec2 apron :roll:


    De-locked doors (also did the wings):


    Treating surface rust with deox-gel (love that stuff)

    Zinc primed

    Primered:

    And finally visible progress, paint:


    Paint isn't 100% a good match but good enough as it wont ever really be seen unless the carpet is lifted

    Leave a comment:


  • Jozi
    replied
    Refurbed callipers (again)



    The discs also got a little loving, they were not even a year old but had some surface corrosion from being stood up


    The whole lot bolted back up to the new coilovers

    These were later stripped back again and sent for powder coating (excl the callipers)

    Front panel chopped out because of rot:

    Intention is to have the replacement panel removable or at least part of it a little easier to get the new engine in and any future engines i may swap into it.

    More random welding



    Seam welding




    Leave a comment:


  • Jozi
    replied
    From here-on-in it gets a little to picture heavy as I have hundreds of pics of every little thing that was done to her. I'll post some random pics of work carried out, if you want to read/see the lot I have a build thread on e30owners.

    The first bits of work were done not long after my brother showed me how to weld before he went of to Oz





    Nearly all bushes are being replaced, wishbones and eccentric lollie-pop bushes are less than a year old, first of many batches of parts 8-)


    More

    The novely has nearly worn of I've had so much stuff delivered since starting :oops:

    More welding, these were tricky






    Outer wheel housing rot





    Battery tray repair:

    Leave a comment:


  • Jozi
    replied
    For the overhaul I wanted to change the look of the car and sort out some rust issue's. Lots of googling for idea's! Collecting of parts etc! Eventually settled on doing something similar to this:



    Some photoshopage later:


    And some more:


    This was the last time she was on 4 wheels (Jan 2010)


    Storing the future new engine:


    Change of plans in Jan 2101 I picked up a touring shell, less rust and 4yrs older, made up a spit and started stripping it down


    Looks can be deceiving....



    Leave a comment:


  • Jozi
    replied
    I'll try summarise most of it and the rest will go back a few months which I'll copy/paste in here.

    ----------------------------------------


    Couple years ago I was after a E30, a 318iS specifically, but due to a lack of funds I was having a hard time finding something I liked. A E30owners forum member and friend crashed his touring towards the end of 2008 and put it up for sale. Money was right for me, it needed a little bit of work to put right but everything else seemed sound, it also came with a m42 engine from a 318iS. Looking a bit sorry this is how she looked when I got her home (all pics from 2009):



    And the mangled front slam panel


    The bent bits were cut out



    Some other typical E30 repairs:



    Painted parts:


    Other work was done that I can't remember before eventually going back on the road in Aug 2009




    Fitted a few upgrades/additions



    New wheels (Borbet B, 16x7.5)


    That roughly sums up a year or so of when I owned this touring


    A engine gasket went and she started leaking water, this is when I decided to take her of the road and start a bit of an overhaul. In hind sight, I should have fixed the engine and kept driving it!

    Leave a comment:


  • F34R
    replied
    Looks great so far! I am such a fan of tourings.

    Leave a comment:


  • Hey_You
    replied
    I love tourings. I want one so bad. Looking forward to the progress. Send me a plane ticket if you need any help!

    Leave a comment:


  • Jozi
    started a topic Touring M52B28 (another one from Ireland)

    Touring M52B28 (another one from Ireland)

    I'm (also) in the middle of a touring resto, not quite to the same extreme as DaveG, but non the less you guys might be interested in it?

    At the minute she's with the spray painter and looks a bit like this:



    He's hoping to have her in primer later this week.

    I was initially going to tidy my (then) current touring up but got hold of a better shell for free (was also going to get scrapped). My blue touring bust a gasket in the M42 and was parked up (I should have just fixed it)



    And my old touring:


    And here's a photoshop I did of a 325ix 4dr with the wheels I have for her


    I'll start copy/pasting the thread progress later this evening. There's a whole lot of pics taken over the past 18+ months, most of it crap but I'll copy the lost as it's just as handy.
Working...