Announcement

Collapse
No announcement yet.

Scum class 318 + Mtech + vortech v2 + unicorns - vortech + Turrrrbo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Man this car is going to be awesome. Quick work with the build too!
    91 318is M50 swapped
    05 Honda Pilot

    24V swap thread
    http://www.r3vlimited.com/board/showthread.php?t=302524

    Comment


      #32
      got my fan mounted on the condenser, sits nice



      hella flush
      stanced fan should make for some bitchin' A/C




      Originally posted by lambo View Post
      Gauge cluster looks awesome! Black powdercoated eurobumpers would look really cool on a tracked delhpin, imo...
      I'm not sure how the color match look will turn out, I might plastidip them if it turns out ugly
      Last edited by pandaboo911; 02-06-2015, 12:14 AM.

      Comment


        #33
        Trying to fit the driveshaft I got, but it's a little bit too long.
        I fully compressed the slip joint and its about 1500mm long. RealOem says it should be 1492mm

        I can push it up a little bit, but it won't go straight.. help?

        Comment


          #34
          Originally posted by pandaboo911 View Post
          [B]
          Bought a full mtech1 kit with euro bumpers for 400 bucks
          Dat price
          I want a nice set of smoked MHW's (I know, get it line)
          Free Stuff!!:http://www.r3vlimited.com/board/showthread.php?t=273454

          Comment


            #35
            you have any problems with the aftermarket guages? and where did you connect them to? the dme? because i thought some guages read different ohms and would read differently for a European car.
            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

            Trust me it stock :yawn:

            Comment


              #36
              Originally posted by knuklehead92 View Post
              you have any problems with the aftermarket guages? and where did you connect them to? the dme? because i thought some guages read different ohms and would read differently for a European car.
              The gauges are mechanical.. no wires

              Tach gets signal from the ECU. Has built in circuit for 8cyl 6cyl or 4cyl applications, just clip a couple wires according to how many cylinders

              Speedo gets signal from diff sensor, has built in calibration

              Comment


                #37
                Quick update, got some parts back from paint. Also received all my hardware yesterday so hopefully I can get these installed this weekend







                titties

                Comment


                  #38
                  Got the front end on.. I gotta say this was a huge pain in my ass and took like 2 hours until it finally fit right.

                  But it was SO worth it.



                  side shot (suspension at full droop)
                  Last edited by pandaboo911; 04-04-2013, 01:50 AM.

                  Comment


                    #39
                    That front end is fannnnntastic! Can't wait for more.
                    BimmerHeads
                    Classic BMW Specialists
                    Santa Clarita, CA

                    www.BimmerHeads.com

                    Comment


                      #40
                      subbed. This is one is turning out well :D
                      320I - under construction

                      Comment


                        #41
                        Epic build!
                        Originally posted by LJ851
                        kingston is the play by play announcer for this thread.
                        ‘Tis by the grace of God that my cars run!

                        Originally posted by unloadedak
                        #teamross
                        Siobhan's Build Thread - UPDATED!

                        Comment


                          #42
                          I hate you very much. That is all
                          Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                          www.gecoils.com
                          My euro 316 project Transaction Feedback

                          Comment


                            #43
                            fap fap fap fap fap

                            What kind of wheels are those?

                            Great job, hope to catch you at a meet sometime.

                            Comment


                              #44
                              Absolutely love it. It's going to be a beauty, and a monster to boot.

                              Comment


                                #45
                                thx for the motivation guys :D

                                my brother just bought a new TRM turbo kit for his e36, so might just buy his old one off him and run a bottom mount s52 tarbo.. so tempting

                                this weekend I'll be tackling the rear subframe, swapping out the old rubber for poly, and start on the 5 lug so I can get this thing on all 4 wheels, I've just about had enough of working in that cramped garage


                                Originally posted by brian52555 View Post

                                What kind of wheels are those?
                                They are some sort of RH mesh wheels, I have very litte information on them. I think they were meant for an e28
                                Last edited by pandaboo911; 04-05-2013, 12:01 AM.

                                Comment

                                Working...
                                X