My euro 320i/B6 3.5 Alpina Tribute ( Now with turbo power)

[Julien]

epic build!!

[ThatOneEuroE30]

My euro 320i/B6 3.5 Turbo Alpina Tribute Now in assembly

updates?

None right now its just chillin at the body shop he'll probably get going on it in a day or so now that I finally got him all the parts. I told him to take his time doing the color sand and what not. I did however clean my basement sunday night and for the first time in 2 years saw the floor haha. Means I'm getting close right?

[kronus]

updates?

[Der Ruffian]

Finally I'm able to see the pictures in this thread, really nice work!

[ThatOneEuroE30]

Just read the whole thread and that thing looks great man, especially with those oz turbos! Btw, did they ever make those in 16s?

Thanks

No never made in 16 only 15x7 i believe.


For those who care i guess the car runs now. Painter plugged in the battery and it started right up i have no clue wtf the problem. Replacing the ignition switch as a precaution

[CRBR30]

Just read the whole thread and that thing looks great man, especially with those oz turbos! Btw, did they ever make those in 16s?

[ThatOneEuroE30]

Im getting power to my fuse box. And my starter. But the exciter wire isnt getting power. On top of that the black and yellow wire that is only power when key is pos 2 is only reading 0.08 when its turned. Ive checked connections and they are all plugged in.

[ThatOneEuroE30]

red flag right there

the thing with that is every thing is plugged back in except a couple thing but i know what those plugs are for and none would cause a no start think i may still pull the dash and see if i can get it to run with out dash in. I think its more of coincidence then any thing

[kronus]

I did recently swap my dash and it ran prior to the swap, how ever I don't think that has to do with any of it.

red flag right there

[ThatOneEuroE30]

So the car no longer runs.... I went to start it after putting down pipes on and no dice the starter solenoid doesn't even click over. Battery is charged I have 12 volts at the fire wall terminal but nothing down at the starter or at red wire on the ignition switch. I jumped the solenoid on the starter and it turned over. Also my lights on my dash still light up but i get no power. I did recently swap my dash and it ran prior to the swap, how ever I don't think that has to do with any of it.

[ThatOneEuroE30]

that valence rocks

i'm uh less positive on the spoiler.. does your trunklid already have the holes?

for putting in the corner clips, put them on both ends of the lockstrip (floating above the gasket), then work them in with a small screwdriver, sticking the outside corner into the gasket first and then working the lip of the gasket around.

Thanks, Yes the hole are already in the trunk as the zender wing came with the car when I bough it. I think once I add a mtech 1 rear it should fill and not look so out of place.

[kingston]

I think it will look great once the Gurney flap is installed.

[kronus]

that valence rocks

i'm uh less positive on the spoiler.. does your trunklid already have the holes?

for putting in the corner clips, put them on both ends of the lockstrip (floating above the gasket), then work them in with a small screwdriver, sticking the outside corner into the gasket first and then working the lip of the gasket around.

[ThatOneEuroE30]

That paint looks like you can fall into it..!!

Take your time with the molding clips, I went through the same thing, patience....

The window clips I used a small flat head screw driver very carefully.

Yes I figured that out. I would hold my end down and have my dad hold the other and hit the middle it seems to do the trick. For the corners how ever. Nothing is working I just don't get it.

[Good & Tight]

That paint looks like you can fall into it..!!
Take your time with the molding clips, I went through the same thing, patience....
The window clips I used a small flat head screw driver very carefully.