1985 325e | M60b40 | Fifty Shades of Bronzit
Collapse
X
-
-
What a transformation! Seriously impressive work, Bronzit has never looked so good.Leave a comment:
-
Your wishes have been granted! Wheels!!!
I had had ordered ESM-004 in the 17x8, and got a call from ESM the next day saying they have been discontinued, but they had 17x9's in stock for the same price. I questioned fitment, but the guys at ESM said the fronts would fit with a fender roll and a 5mm spacer.
So I ordered motorsport hardware Studs and some 5mm spacers as well.
I wanted a square setup, for rotation purposes, so they are wrapped in a 215/40/17... It's a little skinny for my taste, but I was under the impression the wheels would rub. I rolled the rear fenders just slightly as a safety precaution and have yet to rub at all. I think my next set of tires will be 225/40's.




Well it turned out, an 8mm spacer was needed to clear the front struts, and I scraped up the inside lips of the wheel thanks to the guys at ESM :hitler: Needless to say I was pissed, but they do look damn good.

I had to buy spacers locally, and they BARELY clear the front brake caliper






:ST1G:
The front needs to be just a little lower, so I'm currently looking into e90 drop hats.
Last edited by ArtFoodBMW; 12-06-2017, 09:13 PM.Leave a comment:
-
-
Leave a comment:
-
cars coming along so nicely! A set of wheels will make this thing look so much better.Leave a comment:
-
I'll let you know if I get my hands on any.
My Subwoofer amp died after 5 years and two repairs. I bought a new one, its bigger. Bigger is better in this case.

Both side skirts fell off, in search of IS skirts now.


V8 parts. 1G... and counting.

Started the teardown

Someone was burning oil...



The heads were taken to a local machinist for inspection and valve seal replacement. Thankfully they were flat and didn't need machining! This gave me a much better feeling about the heads and block.
Lots of cleaning to do right now.


Lots of cleaner, lots of patience, lots of brushes


The timing cover broke in two spots. I get to go spend some hours at the junkyard now pulling another one. I'm not very happy about it. I also have no idea how they broke.

I blacked out things. I had spares laying around and got bored with the orange on bronzit. Black is much more fitting!

Last edited by ArtFoodBMW; 12-06-2017, 09:03 PM.Leave a comment:
-
Broken odo gears

Replaced with Garagstic gears!

Started prying the red section out of the spoiler


All Painted!

Before

Just to confirm everyone's belief on fitting an e28 sport spoiler on the e30. You need to drill all new holes.

And after
MMMMM








The spoiler is exactly what my kit was missing. I almost like it enough to put down my desire for an mtech 1 kit. I just need a complete respray and repair on some of the body panels.
Last edited by ArtFoodBMW; 12-06-2017, 08:53 PM.Leave a comment:


Leave a comment: