KI4UJO's 24v Build and M42 DD

[KI4UJO]

A few more

e30 paint 5 by Jonathan Martin, on Flickr

e30 paint 4 by Jonathan Martin, on Flickr

e30 paint 2_636007671302523599_Afterlight_Edit by Jonathan Martin, on Flickr

e30 paint 1_636007666458621993_Afterlight_Edit by Jonathan Martin, on Flickr

e30 paint 3_636007674510616380_Afterlight_Edit by Jonathan Martin, on Flickr

[KI4UJO]

Ended up having to respray everything except the hood and roof - the HVLP gun just didn't work well with single stage enamel. So, we dug out his Binks Model 7 that he bought new when opening his shop in the 80s. It shot beautifully - the larger tip worked much better w/the enamel. I'l be buffing the car out tomorrow - very happy with the results.

IMG_5736 by Jonathan Martin, on Flickr

IMG_5742 by Jonathan Martin, on Flickr

IMG_5743 by Jonathan Martin, on Flickr

IMG_5744 by Jonathan Martin, on Flickr

A happy painter - we are both glad to be done with it.

IMG_5745 by Jonathan Martin, on Flickr

[2mAn]

More pics!!

[KI4UJO]

Well, I'm awful about actually making updates, but it is actually painted now! I don't have photos of it untaped, but I'll get some tomorrow before and after the cut/buff. It is sprayed in Acrylic Enamel (Single Stage, Martin Senour. Available from your local NAPA.) When buffed, it has a more "hard shine" look than base/clear, much more "old school" than modern.

Prep: I had already dealt with the rust in the floors and trunk at this point, so it was basically just block sanding.

IMG_5677 by Jonathan Martin, on Flickr

Hit the doorhandles with some SEM while I had them off... Problem is, I like them. Now I have to do all of the other black trim.

IMG_5678 by Jonathan Martin, on Flickr

IMG_5679 by Jonathan Martin, on Flickr

IMG_5682 by Jonathan Martin, on Flickr

IMG_5685 by Jonathan Martin, on Flickr

IMG_5687 by Jonathan Martin, on Flickr

IMG_5688 by Jonathan Martin, on Flickr

IMG_5691 by Jonathan Martin, on Flickr

After weeks of sanding, it finally made it into the "booth" (if my garage w/a large fan and a bunch of plastic qualifies)

IMG_5693 by Jonathan Martin, on Flickr

My dad in the photo - owned a bodyshop in the 80s - glad I have him here, I'm much better w/a motor than I am with a sanding block.

IMG_5694 by Jonathan Martin, on Flickr

IMG_5695 by Jonathan Martin, on Flickr

IMG_5696 by Jonathan Martin, on Flickr

IMG_5697 by Jonathan Martin, on Flickr

IMG_5698 by Jonathan Martin, on Flickr

This is several hours after being sprayed - unfortunately, it had multiple runs. Fortunately, since it is single stage, we were able to simply sand them out and blend the paint (towards the end of round 1, we had an issue w/the spray gun, thus creating the runs).

IMG_5704 by Jonathan Martin, on Flickr

IMG_5705 by Jonathan Martin, on Flickr

IMG_5710 by Jonathan Martin, on Flickr

IMG_5713 by Jonathan Martin, on Flickr

I color sanded/buffed this fender already - came out very nice.

IMG_5722 by Jonathan Martin, on Flickr

IMG_5724 by Jonathan Martin, on Flickr

IMG_5725 by Jonathan Martin, on Flickr

We reshot the areas w/runs a few hours ago - turned out very nice. I plan on color sanding and buffing the car tomorrow afternoon - more photos then.

[KI4UJO]

I haven't updated this for a while, so here we go.

Added a resonator to the exhaust from an e46 and reinstalled the e36 328 back section. Slightly less raspy now, but could still use some work.

I'm planning on repainting the car in the next few weeks, so expect lots of updates regarding that.

Also, drove the car to Florida to see spring training baseball last month - did well w/a few exceptions: 1) A O2 delete plug fell out of the OBD2 headers 2) The wiper linkage broke in half 3) The evaporator core drains apparently have cracks in them, allowing the carpet to get wet when using the A/C.

Lastly, a few photos

_MG_5289 by Jonathan Martin, on Flickr

_MG_5275 by Jonathan Martin, on Flickr

_MG_5278 by Jonathan Martin, on Flickr

_MG_5271 by Jonathan Martin, on Flickr

_MG_5279 by Jonathan Martin, on Flickr

_MG_5293 by Jonathan Martin, on Flickr

[KI4UJO]

Cooling system appears to have been refreshed already - at least according to the date tag on the radiator. Theoretically, due to the car having the cold weather package, it already has the CCV which is currently showing no signs of failure. If the situation arises, however, I've already done the job on my dad's M54 Z3, so I know my way around under the manifold.

I'm with you, though - things such as the CCV were just a bad idea to begin with.

[Codym42]

That's a nice e39! My mom used to have a 2003 530i w/sport package until it got totaled. I love the way they look but make sure you do preventative maintenance on it such as the cooling system and CCV.

[KI4UJO]

Thanks! I'll admit, I was the main driving force between the mostly bmw fleet. If nothing else, maintenance is a lot easier when everything has either an M52 or M54. Then again, cars are my main obsession, so switching vehicles around isn't something I'm opposed to (though I think the e39 is a keeper).

[stonea]

Pretty sweet collection of toys your family has

[KI4UJO]

Added an e36M catback.

IMG_20160206_163919 by Jonathan Martin, on Flickr

IMG_20160206_163944 by Jonathan Martin, on Flickr

IMG_20160206_163947 by Jonathan Martin, on Flickr

End result: I like it much better than the 328 unit w/the valve welded open. Its slightly loud, but then again, I currently have no interior. I'll report back once I actually have one installed again, which brings us to today.

IMG_20160207_142207 by Jonathan Martin, on Flickr

Ok, these holes have been here for a while. If you read my previous build thread on Bdc, you'd know that I patched them w/fiberglass and roofing flashing. I did not have access to a welder at the time and needed to get it back on the road. Now that I have one, those patches needed to go. Not pictured is the fix for the rather large hole. The drivers' side is just as bad, unfortunately.

Also, a few random photos

IMG_20160206_151634 by Jonathan Martin, on Flickr

IMG_20160206_151638 by Jonathan Martin, on Flickr

IMG_20160206_151652 by Jonathan Martin, on Flickr

Lastly, my mom's new DD: 2003 e39 530i W/Sport,Premium & Cold Weather Packages.

IMG_5038 by Jonathan Martin, on Flickr

IMG_5040 by Jonathan Martin, on Flickr

IMG_5044 by Jonathan Martin, on Flickr

IMG_5062 by Jonathan Martin, on Flickr

[KI4UJO]

Things are happening.

_MG_4926 by Jonathan Martin, on Flickr

_MG_4928 by Jonathan Martin, on Flickr

IMG_4921_01 by Jonathan Martin, on Flickr

_MG_4928_01 by Jonathan Martin, on Flickr

Also, I'm installing Bilsteins tomorrow, adding a rear swaybar, and fitting a larger front bar.

Lastly, thanks to sgtskid, I now have some patch panels to expedite the rust repair, move the battery to the trunk, an iS spoiler, along with a few other parts.

[KI4UJO]

Would you sell the 750il wheels?

PM'd

[GCAutosports]

Would you sell the 750il wheels?

[KI4UJO]

My current DD is an 87 vette, actually.

IMG_4573 by Jonathan Martin, on Flickr

IMG_4578 by Jonathan Martin, on Flickr

IMG_4575 by Jonathan Martin, on Flickr

Also, a few e30 photos from a few months ago.

IMG_4574 by Jonathan Martin, on Flickr

IMG_4576 by Jonathan Martin, on Flickr


IMG_4611 by Jonathan Martin, on Flickr

IMG_4612 by Jonathan Martin, on Flickr

IMG_4613 by Jonathan Martin, on Flickr

IMG_4614 by Jonathan Martin, on Flickr

Before the OBD2 Harness committed suicide

IMG_4622 by Jonathan Martin, on Flickr

IMG_4625 by Jonathan Martin, on Flickr

IMG_4626 by Jonathan Martin, on Flickr

IMG_4624 by Jonathan Martin, on Flickr

IMG_4627 by Jonathan Martin, on Flickr

No photos of it, but I picked up an e36 M3 catback for $23 off a 325 at a pull a part.
BTW, the next update is going to be a big one...

[sgtskid]

Awesome e30!
Love the old Vettes too, I have a 90 myself.