E30 Street/TimeAttack (+ E36 V8 Turbo Touring)

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Miuge
    replied
    I should race it next year, so everything should be finished within a year :)

    Yesterday I got E30, E36 and E36 M3,2 spindles side by side for measuring. Gathered some useful data..

    Leave a comment:


  • brainfood
    replied
    Holy mother of amazing build. I can't wait to see where this ends up....

    Leave a comment:


  • Deah7
    replied
    This is wonderful

    Leave a comment:


  • Miuge
    replied
    Getting there.. Gelcoat had melted the paint which made the surface look strange :D But the result otherwise is decent, little bit of sanding and grinding.. Weight 3kg/6.6pounds

    Leave a comment:


  • Miuge
    replied
    Dashboard project continues..

    I finished the mold yesterday, surface wasn't perfect but good enough as the final product goes to flocking:


    Then a thick layer of gelcoat into the mold:


    One layer of chopped type fiberglass and one layer of braid type as reinforcement:

    Leave a comment:


  • Miuge
    replied
    Getting there.. I'm pretty happy with the mold as it's my first big fiberglass project :) Just a little bit sanding and filler into the worst spots. Also started to make foam models for the insets:

    Leave a comment:


  • Miuge
    replied
    Comments like that keeps me going

    Some of you might have seen my "IKEA" dash, I spent a little more time to modify the model, photoshopped how it should look like when finished and today I started to create the mold.

    Sketch:


    Model covered with aluminium tape and wax:


    Gelcoat layer:


    Fiberglass:


    And couple of foam reinforcements:


    Tomorrow the moment of truth

    Leave a comment:


  • IRON-E
    replied
    I've limited my visits to r3v but, I feel like your project is gonna keep me on the edge.


    Keep up the good work. 👍

    Leave a comment:


  • litu
    replied
    Awesome....

    Leave a comment:


  • Miuge
    replied
    Monday update:
    Finally I got all the seat mounts welded and made a bracket for a hand brake, it's time for paint soon!


    Driver fits and driving position is somewhat cozy and roomy, I like:

    Leave a comment:


  • Miuge
    replied
    Thank you! :)

    Here's few aluminium bits I made recently, these should keep feet still and reduce the heat radiated from the gearbox or exhaust:


    Passenger side:
    Last edited by Miuge; 02-12-2015, 10:54 AM.

    Leave a comment:


  • unloadedak
    replied
    my god.

    beautiful fabrication.

    Leave a comment:


  • IzzY_325is
    replied
    That first picture though, sweet build.

    Leave a comment:


  • MatRacer
    replied
    Crazy project! Do like!

    Leave a comment:


  • litu
    replied
    Cool :)

    Leave a comment:

Working...