'89 lachssilber 318i touring.. beginning build

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Heitzke
    replied
    Little quiet on updates, been spending a little time checking on structure.

    Good news/bad news. Found the source of moisture in the right rear hatch compartment



    That triggered me to start poking around further. Front passenger floorboard (and a pretty wet floor) -

    Passenger outside rail -

    Ran out of light pretty quickly, but that's enough for me to realize I need to go ahead and strip the interior down bare and see what I really have going on.

    The front passenger corner spot is pretty mushy, so I assume moisture is heading in there, but at the same time, I don't know what's along the trans tunnel or inside corner.

    Leave a comment:


  • Heitzke
    replied
    Yeah i'm in that same boat. I got a little card underneath my wiper offering their console bits for sale... which means I probably need to get this interior back together

    Leave a comment:


  • KI4UJO
    replied
    Glad you liked them. Don't think I'll be at this weekend's event, I need to put my interior back in.

    Leave a comment:


  • Heitzke
    replied
    Originally posted by KI4UJO
    Now I realize where I've seen this car - I met you at cars & coffee last weekend (I took several photos of your touring for an instagram page).
    Haha hey man! I completely forgot to ask who all there was on r3v. Thanks for posting the pics, lookin' good. The engine bay somehow looks cleaner in the pics than in real life.

    Leave a comment:


  • KI4UJO
    replied
    A few of the ones I shot.
    IMG_5090 by Jonathan Martin, on Flickr

    IMG_5091 by Jonathan Martin, on Flickr

    IMG_5092 by Jonathan Martin, on Flickr

    Leave a comment:


  • KI4UJO
    replied
    Now I realize where I've seen this car - I met you at cars & coffee last weekend (I took several photos of your touring for an instagram page).

    Leave a comment:


  • SSE30
    replied
    For being a Polish market car, that rust seems fairly light and should be relatively easy to remedy. It's always so sick to see a fresh touring import. Can't wait to see what you do with it.

    Leave a comment:


  • roguetoaster
    replied
    I'd bet that you're getting a coolant leak from the tank gaskets. You can rebuild the radiator overflow tank, but it's a bit of a pest to do and not much less expensive compared to a new radiator assembly.

    Leave a comment:


  • Heitzke
    replied
    Originally posted by roguetoaster
    That rust does look to be a bit of a worry as the pic appears to show metal flaking. Even so, it looks like it's still at wire wheel/rust coverter/undercoat.

    As to the radiator, it's fairly uncommon to have the "drain plug" (rarely works as it gets clogged with deposits) leak. Fortunately, it's all M42 stuff, so is readily available.

    For the sunroof handle be sure to get an OE one as every alternate brand I've tried has broken or had the spring fail. For instance, the spring on the one that was in the car failed the day you came to pick it up, despite being under 6 months old.

    I should also let you know, as I think I forgot to tell you, the fuel pump was replaced the day the car was delivered from the port. I removed one from the race car and installed it, so it had 20 track hours on it prior to install. It's also an M42 component.

    Glad the pics helped, they'll be there as long as google doesn't break photos again.
    Nice, all really good to know. Supposed to have some nice weather, so hopefully get a little more wrench time this weekend.

    I'll have to inspect the radiator a little more. For lack of a better description the little blue 'block' on the bottom of the drain area seems to slowly collect coolant and drip. It's also conveniently the lowest part of the radiator, so I may strap a gopro under there and see where I'm pushing coolant.

    It's a pita, but I think i'll just buy a new oem handle. I blew through another used factory piece in all of 10 minutes.

    Leave a comment:


  • roguetoaster
    replied
    That rust does look to be a bit of a worry as the pic appears to show metal flaking. Even so, it looks like it's still at wire wheel/rust coverter/undercoat.

    As to the radiator, it's fairly uncommon to have the "drain plug" (rarely works as it gets clogged with deposits) leak. Fortunately, it's all M42 stuff, so is readily available.

    For the sunroof handle be sure to get an OE one as every alternate brand I've tried has broken or had the spring fail. For instance, the spring on the one that was in the car failed the day you came to pick it up, despite being under 6 months old.

    I should also let you know, as I think I forgot to tell you, the fuel pump was replaced the day the car was delivered from the port. I removed one from the race car and installed it, so it had 20 track hours on it prior to install. It's also an M42 component.

    Glad the pics helped, they'll be there as long as google doesn't break photos again.

    Leave a comment:


  • Heitzke
    replied
    First. mother. fucking. handles.



    Hangin' in front of the E30 hut. Now with TWO fogs



    Looking for a little coolant drip, think it's actually the drain plug gasket. Annoying.



    Also took the chance to grab some rust pics. Rust doesn't really bother me, but on a scale of 1-10, where do these fit?







    The front jackpoints have a little gap, which is shitty, so they're rust compromised. May need to grind off the undercoating in places and see what things really look like in the sills :/


    Thing really needs a polish too. Also check the 80's tandem in the back, it almost leads to a divorce every time it's ridden.



    New Roundel on the back... cause:



    Since I finished up the sunroof, took the chance to do a paint cleaning and quick single-stage polish and collinite wax to give it a fresh sealing. Tiny tiny bit of clearcoat failure on the back, so want to preserve the nice paint I can.


    Here's ONE PASS on the sunroof panel on the claybar:



    Second pass:



    Cleaning just the roof took forever (and also killed 1.5 claybars, ha)


    Edit: Actually, looking back through some of Rougetoasters photos (thanks dude) I see that the bottom of the car really wasn't too rusty before the coating was redone. I guess i'll just continue on with the previous plan of maybe repairing the front jack point area, and then pulling off the fender liners and bumpers to check for other rusty regions.

    Need to go through and treat a few areas. Tiny bit of surface rust in the back right hatch compartment, little bit underneath the rear window on the hatch.
    Last edited by Heitzke; 02-24-2016, 03:06 PM.

    Leave a comment:


  • Heitzke
    replied
    Originally posted by roguetoaster
    How are you feeling about the M40 now that you're a couple months in?

    Also, this is the touring of the trio that I miss the most now that it looks like the 324 has found a new home in CA. Maybe I'll get to see it again one day, sigh.
    Really not so bad. I've driven slower cars, but this is a fun slow. Think i'm going to do the timing belt (like I have a choice, ha) here in a couple weeks, and then see what happens during the AutoX season.

    I've gotten really attached to the car in a short period of time. R3V meetup sometime? (I haven't been here long enough to know how/if/when these happen)

    Leave a comment:


  • roguetoaster
    replied
    How are you feeling about the M40 now that you're a couple months in?

    Also, this is the touring of the trio that I miss the most now that it looks like the 324 has found a new home in CA. Maybe I'll get to see it again one day, sigh.

    Leave a comment:


  • NufnSus
    replied
    Originally posted by Heitzke
    This is what I THINK is a wireless remote system? I've found people using it on german forums, but google translate is making everything hard to follow. Halp?
    Shoot me a PM if you still need some help figuring this one out

    Very nice wagon you've scored there, always good seeing a tasteful E30 revival!

    Leave a comment:


  • 2mAn
    replied
    Love it! Keep going, Im excited to see the progress

    Leave a comment:

Working...