M3 Sport Evolution. Passion and restoration.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MukeM3
    Member
    • Dec 2016
    • 87

    #121
    Originally posted by Lietuvis
    Can you tell part number of lights holes seals? if its goes separately from front grills.
    You can't buy them separately. These seals comes with Sport Evo grills, but they are NLA. Here: #2 and #3: http://bmwfans.info/parts-catalog/E3...trim/grille_2/

    Something made. New inner and outer lists:

    [IMG][/IMG]

    [IMG][/IMG]
    Last edited by MukeM3; 01-26-2019, 11:52 PM.
    M3 Sport Evolution 1990
    M3 215hp 1990
    318i 1988

    My restoration project: https://www.r3vlimited.com/board/sho...d.php?t=399373

    Comment

    • CurrusDei
      Mod Crazy
      • Mar 2014
      • 673

      #122
      Are the evo 3 grilles still available? If so, mind to share the part no?


      Sent from my iPhone using Tapatalk
      _______________________________________________
      5 Year M3 Build, In Progress
      RMT200 Retrofit

      Comment

      • Lietuvis
        Noobie
        • Aug 2010
        • 30

        #123
        Originally posted by CurrusDei
        Are the evo 3 grilles still available? If so, mind to share the part no?


        Sent from my iPhone using Tapatalk
        Evo 3 central grills still available part no: 51132233001

        Comment

        • pandaboo911
          R3VLimited
          • May 2010
          • 2070

          #124
          I was reading this thread around 1am when r3vlimited servers went down. I cried.

          Comment

          • MukeM3
            Member
            • Dec 2016
            • 87

            #125
            New rear emblem installed in place. With original instructions were easy.


            [IMG][/IMG]

            [IMG][/IMG]


            At first I marked the right place with tape.

            [IMG][/IMG]

            Ready.

            [IMG][/IMG]

            Also new engine compartment seal and Evo's fenders / bonnet gaskets and fuse box cover.

            [IMG][/IMG]

            [IMG][/IMG]

            [IMG][/IMG]

            All in Place.

            [IMG][/IMG]

            Couple of stickers.

            [IMG][/IMG]

            [IMG][/IMG]

            [IMG][/IMG]
            Last edited by MukeM3; 01-26-2019, 11:52 PM.
            M3 Sport Evolution 1990
            M3 215hp 1990
            318i 1988

            My restoration project: https://www.r3vlimited.com/board/sho...d.php?t=399373

            Comment

            • CurrusDei
              Mod Crazy
              • Mar 2014
              • 673

              #126
              M3 Sport Evolution. Passion and restoration.

              Originally posted by MukeM3


              Quick question for you. How did you get the sound insulation to lay so flat? mine is pulling forward (away from the fire wall) along the top and doesnt sit as flat as yours does overall, did you need to heat it or apply an adhesive?



              Here's mine...

              _______________________________________________
              5 Year M3 Build, In Progress
              RMT200 Retrofit

              Comment

              • reelizmpro
                R3V OG
                • Dec 2003
                • 9446

                #127
                wow, good job. Super clean.
                "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

                85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
                88 M3 - LACHSSILBER/SCHWARZE
                89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
                91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER

                Comment

                • MukeM3
                  Member
                  • Dec 2016
                  • 87

                  #128
                  Originally posted by CurrusDei
                  Quick question for you. How did you get the sound insulation to lay so flat? mine is pulling forward (away from the fire wall) along the top and doesnt sit as flat as yours does overall, did you need to heat it or apply an adhesive?
                  I used (as factory) contact glue. This one works fine: http://www.pattex.co.za/en/products/contact.html
                  In addition, I have the blower housing cover plate in place and this will keep also sound insulation in place.
                  M3 Sport Evolution 1990
                  M3 215hp 1990
                  318i 1988

                  My restoration project: https://www.r3vlimited.com/board/sho...d.php?t=399373

                  Comment

                  • CurrusDei
                    Mod Crazy
                    • Mar 2014
                    • 673

                    #129
                    Interesting. Did you glue just the loose top parts or the entire thing?


                    Sent from my iPhone using Tapatalk
                    _______________________________________________
                    5 Year M3 Build, In Progress
                    RMT200 Retrofit

                    Comment

                    • pipeuy
                      Advanced Member
                      • Jun 2014
                      • 105

                      #130
                      Brilliant just brilliant.
                      1990 Bmw 316i 2 door Alpine Weiß 2
                      1990 Bmw 535iA Alpine Weiß 2 (soon to be manual)

                      Comment

                      • MukeM3
                        Member
                        • Dec 2016
                        • 87

                        #131
                        Originally posted by CurrusDei
                        Interesting. Did you glue just the loose top parts or the entire thing?
                        Only upper edge of insulation. About one inch width.
                        M3 Sport Evolution 1990
                        M3 215hp 1990
                        318i 1988

                        My restoration project: https://www.r3vlimited.com/board/sho...d.php?t=399373

                        Comment

                        • MukeM3
                          Member
                          • Dec 2016
                          • 87

                          #132
                          Last parts begins to find their place.

                          [IMG][/IMG]

                          [IMG][/IMG]

                          Finally, a new steering wheel and gear knob.


                          [IMG][/IMG]

                          Slightly like "empty feeling" now. After this I sat on a chair in the garage probably two hours and watched a car. Almost exactly 7 years went to work. Then the question, what to do after this.

                          I put those kinds of tuning wheels on the car, as in the original Evo-wheels had not yet applied new tires.

                          [IMG][/IMG]
                          Last edited by MukeM3; 01-26-2019, 11:53 PM.
                          M3 Sport Evolution 1990
                          M3 215hp 1990
                          318i 1988

                          My restoration project: https://www.r3vlimited.com/board/sho...d.php?t=399373

                          Comment

                          • Powling
                            E30 Fanatic
                            • Jan 2015
                            • 1290

                            #133
                            Wow...after all that its just done?! Amazing attention to detail.
                            Steve • Toronto
                            1991 318is • Brillantrot
                            Build Thread

                            Comment

                            • CurrusDei
                              Mod Crazy
                              • Mar 2014
                              • 673

                              #134
                              Bravo sir. I'm already thinking about what to do after "done". It's a tough one. I'm thinking 911. Your car is gorgeous. Hopefully I'll be done in 14 months


                              Sent from my iPhone using Tapatalk
                              _______________________________________________
                              5 Year M3 Build, In Progress
                              RMT200 Retrofit

                              Comment

                              • ThatOneEuroE30
                                R3V OG
                                • Dec 2013
                                • 8626

                                #135
                                Wow. Just wow. Car is amazing man. I wondered the same thing so I got more projects haha


                                1989 325is l 1984 euro 320i l 1970 2002 Racecar
                                1991 318i 4dr slick top


                                Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
                                Vintage race car revival (2002 content)
                                Mtech 2 turbo restoration
                                Brilliantrot slick top "build"

                                Comment

                                Working...