Daily'ed Sedan build: 1986 325

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • wworm
    replied
    Originally posted by Bimmerguy91
    I'm pretty sure that they will sit lower. They also can shave the base and make them sit an inch lower than standard GTS II as well.


    Sweet thanks!


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • Bimmerguy91
    replied
    Originally posted by wworm
    Anyone know if corbeau gts ii seats with corbeau brackets sit higher or lower than stock seats? I'm looking to get a set of matching bolstered cloth seats but prefer a somewhat lower seating position.
    I'm pretty sure that they will sit lower. They also can shave the base and make them sit an inch lower than standard GTS II as well.

    Leave a comment:


  • wworm
    replied
    Anyone know if corbeau gts ii seats with corbeau brackets sit higher or lower than stock seats? I'm looking to get a set of matching bolstered cloth seats but prefer a somewhat lower seating position.

    Leave a comment:


  • wworm
    replied
    Alright text only update for now, pics to come:

    trying to get rid of the gnarly squeaks from installing poly bushings. If anyone has any tips other than "smear the living sh*t out of everything with copper anti seize" that would be great.

    Was driving today and heard a chunk/clang immediately followed by a rubbing noise. Fortunately, I was only two blocks away from home so I got home and jacked the car up to find that I had lost a caliper guide bolt on the drivers side caliper. Got a replacement at the hardware store and loctited it prior to installation. After driving the car around I seem to have a sponge instead of a brake pedal now. As I'm going out of town for the weekend, I'll be taking the car into a shop to get looked over and hopefully my brakes will be back up and running smoothly by the time I'm back!

    Leave a comment:


  • _stefan
    replied
    those shift boots look nice

    Leave a comment:


  • MR E30 325is
    replied
    Originally posted by wworm
    Oh man thats a dangerous thing to say to me, haha. However, I live in CA and I'd like to BAR this swap for the time being.
    What supercharger setup were you running?
    It was the AA Rotrex C30 kit, slightly modified/upgraded

    Leave a comment:


  • wworm
    replied
    Originally posted by MR E30 325is
    I had a supercharged S52 for a year or so (til the SC took a dump on me).

    If you are fantasizing about it, I can tell you without any fear of error, that it is abso-fucking-lutely a must do!

    Insanity is a great word to describe it.

    Oh man thats a dangerous thing to say to me, haha. However, I live in CA and I'd like to BAR this swap for the time being.
    What supercharger setup were you running?

    Leave a comment:


  • MR E30 325is
    replied
    Originally posted by wworm
    Yeah pulling it off is no joke, however, if you dont clean the surfaces prior to installation like me, it makes things a liiiiittle easier. I made sure not to cover up anything removable or any wiring so I can't imagine I'd ever need to remove it unless this becomes a full blown track car build...

    I fantasize about a supercharged 24v setup...

    edit: eyyyy 69th post
    I had a supercharged S52 for a year or so (til the SC took a dump on me).

    If you are fantasizing about it, I can tell you without any fear of error, that it is abso-fucking-lutely a must do!

    Insanity is a great word to describe it.

    Leave a comment:


  • wworm
    replied
    Yeah pulling it off is no joke, however, if you dont clean the surfaces prior to installation like me, it makes things a liiiiittle easier. I made sure not to cover up anything removable or any wiring so I can't imagine I'd ever need to remove it unless this becomes a full blown track car build...

    I fantasize about a supercharged 24v setup...

    edit: eyyyy 69th post

    Leave a comment:


  • Stanley Rockafella
    replied
    Originally posted by The_Lope7
    Sounds like the dynamat is really doing the trick so nice! However I do cringe at the idea of ever having to remove it later down the road. That stuff is a huge pain to get off and leaves that nasty sticky residue everywhere.

    There's a simple solution for that....
    sell the car

    Leave a comment:


  • The_Lope7
    replied
    Sounds like the dynamat is really doing the trick so nice! However I do cringe at the idea of ever having to remove it later down the road. That stuff is a huge pain to get off and leaves that nasty sticky residue everywhere.

    Leave a comment:


  • sampayne
    replied
    Thats good to hear. I'll definitely have to get some. Thanks

    Leave a comment:


  • wworm
    replied
    Originally posted by sampayne
    Nice progress so far! Does the dynamat on the rear bench make a noticeable difference in reducing outside noise?
    Yeah I'm kind of impressed tbh considering I only put it under the bench cushion. I used to work in a porsche 356 and 911/912 restoration shop and dynamatted the entire interior of a track 912 build and was thoroughly impressed by how much quieter it was after sticking it everywhere. I plan to eventually put it on the floor under the carpet too and maaaayybe in the ceiling under the headliner.

    IMG_1409 by el_wormo, on Flickr

    Wish I had photos of the interior. Installing it sucked cuz that car is so damn tiny on the inside. But overall dynamat is just a big giant stretchy sticker and is super easy and very worth it in my opinion, especially for long trips and stuff.
    Last edited by wworm; 07-18-2017, 10:24 PM.

    Leave a comment:


  • sampayne
    replied
    Nice progress so far! Does the dynamat on the rear bench make a noticeable difference in reducing outside noise?

    Leave a comment:


  • wworm
    replied
    Originally posted by MR E30 325is
    This should help



    I'll update this post after you fix the links and I read your intor.
    Thanks!

    Leave a comment:

Working...