Sonny's Weak M10 Build

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts

  • 2mAn
    replied
    Thats weird that the paint flaked off the fender so easily. Is it the original fender?

    Leave a comment:


  • Sonny
    replied
    Originally posted by Javier h
    They normally test drive it afterwards. Do not let them go got a test drive BEFORE do the alignment. I had this one shop disappear on me for 20 minutes.....some BS rule they needed to feel the car.


    What exactly do i say to the shop ?

    Leave a comment:


  • Javier h
    replied
    Exactly

    They normally test drive it afterwards. Do not let them go got a test drive BEFORE do the alignment. I had this one shop disappear on me for 20 minutes.....some BS rule they needed to feel the car.

    Leave a comment:


  • Sonny
    replied
    Sonny's Weak M10 Build

    does this look bad?

    Did my best by hand
    Last edited by Sonny; 05-07-2019, 12:37 PM.

    Leave a comment:


  • glnr13
    replied
    Originally posted by Sonny
    They drive it around the block to test everything.
    i've had dozens of alignments in the last 20+ years of car ownership and really good shops do test drives after. basic shops give you a printout and get you out of there asap. if you're into that type of alignment (which your car isn't ready for imo. think coilovers, corner balanced, track prep, etc) go to Bullet performance, they love e30s and will take care of you plus they're not far from you, costa mesa. i'm sure they'll do a basic alignment for you as well.

    Leave a comment:


  • AudioNToxication
    replied
    this thread delivers.
    where the hell are you that you are near a les schwab.
    try bymar tire in mission viejo if you really are in newport.

    Leave a comment:


  • Melon
    replied
    Originally posted by Sonny
    Can anyone help me out? I want to get new tires/ alignment. But I absolutely don’t want any of the workers driving it? Is it okay to ask them not to. I know it’s a old m10, but I care for it and don’t want a teenager ripping my gears .
    99.99% Of teenagers can't drive a manual anyway.

    Leave a comment:


  • DaWildBeast
    replied
    Originally posted by Sonny
    Maybe it’s just the place I go to, any chain retailers that don’t do this that you recommend? Les Schwab maybe but I feel there to cheap.


    Les Schwab does it I think it’s around $100 or less. They also give you a print out of the specs for the alignment when it’s finished.


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • Sonny
    replied
    Originally posted by DaWildBeast
    Never heard of that tbh, an alignment doesn’t take long you can literally sit in the waiting room.


    Sent from my iPhone using Tapatalk

    Maybe it’s just the place I go to, any chain retailers that don’t do this that you recommend? Les Schwab maybe but I feel there to cheap.

    Leave a comment:


  • DaWildBeast
    replied
    Originally posted by Sonny
    They drive it around the block to test everything.


    Never heard of that tbh, an alignment doesn’t take long you can literally sit in the waiting room.


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • Sonny
    replied
    Originally posted by glnr13
    up the ramps, down the ramps. where else are they going to go beyond 5mph?


    They drive it around the block to test everything.

    Leave a comment:


  • glnr13
    replied
    up the ramps, down the ramps. where else are they going to go beyond 5mph?

    Leave a comment:


  • Sonny
    replied
    Sonny's Weak M10 Build

    Can anyone help me out? I want to get new tires/ alignment. But I absolutely don’t want any of the workers driving it? Is it okay to ask them not to. I know it’s a old m10, but I care for it and don’t want a teenager ripping my gears .
    Last edited by Sonny; 05-06-2019, 08:30 PM.

    Leave a comment:


  • Sonny
    replied

    Leave a comment:


  • Sonny
    replied
    Originally posted by Melon
    Also, get and alignment.


    Redoing my inner tie rods already have new locking plates, probably not tight enough. Brought some wheel weights to add the ones chipped off.

    Leave a comment:

Working...