A 300 lb Puerto Rican stole my Seta~!~!

[Van Westervelt]

What do you call that black pieces that is atatching to the back side of the radiator? I need that part in my S50. It is like a piece to draw air?

Its the cooling duct to the alternator.

I haven't done any swaps or worked on any other BMW motors but It looks like the m20 exhaust is held on by 6 studs and the s50
is held on by 24.





How hard are these swaps to do? Any modifications to the E30 itself?

Those are both shots of the s50. The first one is just the intake side.

[falcon64]

did u use the factory e30 tranny and wiring harness

[Van Westervelt]

Used the stock e30 tranny (g260) I dont know what you mean by the harness? You have to use the harness for the engine out of the donor car or the like. Its the e36 s50 harness, with an adapter made to plug into the e30 chassis plug.

[surebimmer]

Were did you get that intake boot? Does it have all the stock ports for pcv and idle valve? Looks like that's a 3.5 inch MAF.

[smonkbmw]

bimmerworld.com. samco TB boot. and they have a 3" or 3.5" item.