What did you do to your E30 today?

[twism]

I didn't really do anything to it, but I got the cams for it yay :D

[Reap3r]

I drove it to work. And I managed to shoehorn a benchtop inside it because my daily is still broken :(

[kuuki]

Swapped rear tires from side to side..
Now I have something to burn :D Thankfully I can put winter tyres in end of next month.. Should first find a good set of style 5.

[MikeDE]

Sold it's M50/G250 b/c i'm broke.....and cleaned it for a meeting later, pics to follow

[Jalves619]

Started yesterday with an oil change, new front rotors and a complete retorque of the front suspension along with a set of spacers to keep my dsII's from rubbing. Today hopefully I can get the camber/toe adjusters welded on for the rear so I can finish the 5lugz.

[lga714]

Preparing my S50 ;)

[Jand3rson]

I'm giving some serious thought to considering thinking about going out to the garage, and beginning the task of masking off my front and rear windshield seals so I can PlastiDip them.

[Dave]

1. Did a stomp test on it to determine the cause of a CEL/warm rough running/misfire condition.

2. Found it to be code 1252 "fuel injectors"

3. Bought some CRC electrical contact cleaner and some dielectric grease.

4. Went to inspect/clean the C101 under the intake - found it to look okay, cleaned it anyway, and found that the half mounted to the metal bracket thingy was not mounted properly - such that when it was connected, it was not a 100% tight fit. Remedied that, hit the contacts with some dielectric grease and snugged it up.

5. fired it up - ran it well past the point where I had been having the problem and it ran like a charm. Hoping I found and fixed my problem.

6. Ordered a new center emblem for my steering wheel and a cheap Chinese knock off wheelskins kit on eBay.

[straight6pwr]

new chrome front kidneys, painted tail lights red.

[Dolmangar]

Over the past few days:

1. Replaced front sway bar end links - Completely worn out.
2. Replaced tie rod end bolts - both were stripped and clunking because they couldn't be tighted
3. Replaced Oil Control Valve - Completely stopped leaking oil!!!!
Easy but PITA job at the same time - nothing like laying on your back with a spring loaded cover and a spring clip pointed at your head.

4. Passed Va Safety and Emissions Inspections on the first try!

Now Road Legal! - I bought the car about 2 months ago and have been working on it to make it a weekend car / nice weather DD. Hope to start driving it to work a few times a week now that it's a bit cooler (no AC...yet).

[Cyrix2k]

removed the hood, removed boost, and removed the grills & kidneys. I'm trying to fit a volvo 740 intercooler and it's being a pita.

[Charley]

Cleaned and painted my diff, still need to clean the cover and press in the
poly diff bushing

[pharow]

found out tht one of my spark plugs was loose. i dont know how tht happened. all good now.

[Jand3rson]

Well, thinking about it got the best of me, and I got bored. I started masking off my windshield seals so I can PlastiDip them. They're faded and gray-ish, and they make the whole car look bad (to an anal OCD sufferer like me).

[kamotors]

ordered brembo brakes for all four corners, time to get rid of my glazed rotors.