Cut off a really really big piece of the rear floor.
-
-
Straight hood, wash, and a few pics.
Oh, and pinstripe delete.Attached Filessigpic
Reich und Roll!Comment
-
-
260 re-seal-FREEDOM- is cruisin at 80, windows down and listening to the perfect song-thinking "this is it"
-The Beauty in the Tragedy-
MECHANIC SMASH!!- (you all know you do it)
Got Drop?? ;-)
Originally posted by JinormusJComment
-
Put my chrome kidneys back on. Need to straighten that lower valance though.Attached FilesLast edited by jdirty; 07-14-2013, 08:42 AM.sigpicComment
-
-
Took it to get my groceries.For all things 24v, check out Markert Motorworks!Originally posted by mbonanniComment
-
Drove to San Diego and picked up new to me interior!
Comment
-
temporarily patched up an exhaust leak.
worked on refinishing the other basket weaves.
received my hella euro smileys from Germany, completely destroyed... FMLComment
-
Fixed the ABS Relay so now my Anti Lock light in the cluster is finally turned off!88 M3 Diamantschwarz
89 M3 Zinnoberrot
56 Isetta
__________________________________
ALL California E30 M Owners CHECK HERE
http://www.r3vlimited.com/board/showthread.php?t=307420
__________________________________
LIKE ARCHIE'S on Facebook!
www.facebook.com/archiesicecreamComment
-
Not today, but, I put her on a ship to the big island of hawaii, I miss her dearly.-Andy
Comment
-
Using a hammer, i pulled out my lower valance to straighten it out.Last edited by jdirty; 07-16-2013, 11:22 AM.sigpicComment
-
I did this...
#ShenanigansE30 1989 Touring AC Schnitzer S3 replica http://www.r3vlimited.com/board/showthread.php?t=320784
Ruffian 1987 318is 2 door Hartge project http://www.r3vlimited.com/board/showthread.php?t=290863
Natalma 1990 Touring AC Schnitzer S3
#GlorianaE28 1986 525i
#AnniePowerE34 525i 3.2 M50 with AC Schnitzer S5 parts
sigpicComment
-
saturday:
installed new pads and shoes.
I really gotta pick up a disc conversion for the rears, that drum brake job is stupid.
adjusted the e-brake.
sunday:
finally aligned my new headlights
replaced busted glovebox handle
replaced busted window crank
picked up some downtown special 5 1/4" kickers all around. better than the 4" boston acoustics PO had installed and hanging by a single bracket.
today:
cranked the koni's down half of a turn. might need another half or quarter turn.sigpicComment
-
removed the chrome trim on my car and took it to get powder coatedHow to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.Comment
-
Replaced my clutch master cylinder. If I never have to do that again it's too soon.Last edited by Bimmer_man; 07-18-2013, 11:33 PM.Float like a cadillac sting like a Bimmer!:)
sigpicComment
-
^
Been there done that. HUGE PAIN IN THE ASS!
Today I wired in some e36 window switches, and rewired my radio with quality crimps and heat shrink tubing. This weekend I get to pick up a very nearly crack free dash. Cant wait.sigpic
"The bitterness of poor quality remains long after the sweetness of low price is forgotten."
Comment
Comment