What did you do to your E30 today?

[gazellebeigem3]

put in a new clutch and pulled off the exhaust manifolds! yaaay

[ivo316]

Did brakes today, new pads and rotors, PO never did anything to them, so they were too grooved to machine.

BTW - the wires that go to the brake light were busted, so i have to get new ones, i guess from the stealership.

The guys worked great, it took them less than 2 hours, and the car practically stands on the front bumper when i slam on the brakes.

Well spent money. :p

[gazellebeigem3]

Did brakes today, new pads and rotors, PO never did anything to them, so they were too grooved to machine.

BTW - the wires that go to the brake light were busted, so i have to get new ones, i guess from the stealership.

The guys worked great, it took them less than 2 hours, and the car practically stands on the front bumper when i slam on the brakes.

Well spent money. :p

In a hurry to glaze your pads, eh? Its a good plan to avoid slamming on your brakes to let the pads seat into the rotor.

[Funkmasta]

recycled 2 of them :mrgreen:

[monty]

Got all the stoneguard off the from valance.
It's ready to take to my work and fill the seams on the rear
valance and paint.

[jerods87e30]

Drifted like never before today, nearly gulped.

[brandondan1]

Installed a new AFM today and gave it a ferrari tune-up. Ran weird for a while, but i turned it off and cranked it up again and it ran MUCH better... hope it stays that way.

[Dominic49]

i wired my highbeams to be turn indicators...

[JasonC]

i wired my highbeams to be turn indicators...

What?? I hope you're joking

[Dominic49]

What?? I hope you're joking

nope I dont have a front bumper so no turn Indicators so I just used some extra 9005 connectors i had lying around and made a harness...

[mode]

I replaced a rocker.

[DuMa]

i gave it a hug today.

[sticksdaman]

nope I dont have a front bumper so no turn Indicators so I just used some extra 9005 connectors i had lying around and made a harness...

vid or ban

[mode]

nope I dont have a front bumper so no turn Indicators so I just used some extra 9005 connectors i had lying around and made a harness...

You are full of shit. The turn signal circut could not handle the amps that the bulbs draw. unless you put low wattage bulbs in there.

[StereoInstaller1]

I changed my RCA cables today (Stinger "Dream" series) and added a sub level controller, changed the bulb in the 3rd brakelight...which failed due to big boom and window slapping the housing. Moved it 1/4" further away from the window, too.

Cleaned up the alarm wiring a bit, too.