salvage beast(not really)

[kamotors]

That sucks. Are you sure? I remember having trouble moking up my front end til I got the small pin on the top of the kidney grill assy into the small hole on the core support. And triple check that they swing in bottom first on the "claws" on the botom.

no because the broken grill fits fine

[Farbin Kaiber]

i need a new OEM kidney grill for under $70 shipped. aftermarket kidney is too tall.

That sucks. Are you sure? I remember having trouble moking up my front end til I got the small pin on the top of the kidney grill assy into the small hole on the core support. And triple check that they swing in bottom first on the "claws" on the botom.

[blunttech]

Teh moar extensionz teh moar powa.

hey man, are you making fun of me? i think it would look sweet and at the same time give me a touch more downforce when i rip it through the s turns

[Vagcycle]

dude, on those little extensions you are making for the front splitter.... is it possible to make another extension for the extension? like have them stacked? i think it would look wicked awesome with 1 more extension. can you mock it up and take a pic?

Teh moar extensionz teh moar powa.

[Farbin Kaiber]

Or extend the extension a bit more, I wonder if you could make some sicko cannard wings for an mt2 front outta that material.

[blunttech]

dude, on those little extensions you are making for the front splitter.... is it possible to make another extension for the extension? like have them stacked? i think it would look wicked awesome with 1 more extension. can you mock it up and take a pic?

[kamotors]

BFH

:p

so there isn't an adjuster for the front? so new question the left side isn't as far back as it should be and i shoved it as far back as it can go how do i adjust that.

[nando]

BFH

:p

[kamotors]

okay i need tips on how to make the front part of the bumper go up, the sides are aligned but the front part is a little too low, i dont really see anyway of doing this? nose peice and bumper are OEM so they sould fit perfect but they dont.

[Farbin Kaiber]

wow i always thought it would cost like $4000

Just consider that you paid yourself $3600.00 for the labor then.

[kamotors]

If not less-- I spent ~$50 at pick n pull for a transmission, clutch, pressure plate, flywheel etc. I got the pedal assembly from one of my parts cars, but that wont cost you more than $15-20 anyway. Shift linkage might get tossed in with the tranny, and if not, it will cost $5. The driveshaft may be $20. So you are looking at about $100 in parts on the cheap.

If you want to put in a new clutch kit, that'll run around $200 or so, and rebuilding the linkage with a short shifter will be about $100. So $400 with everything freshened.

wow i always thought it would cost like $4000

[rThor432]

is a 5 speed really only $500?

If not less-- I spent ~$50 at pick n pull for a transmission, clutch, pressure plate, flywheel etc. I got the pedal assembly from one of my parts cars, but that wont cost you more than $15-20 anyway. Shift linkage might get tossed in with the tranny, and if not, it will cost $5. The driveshaft may be $20. So you are looking at about $100 in parts on the cheap.

If you want to put in a new clutch kit, that'll run around $200 or so, and rebuilding the linkage with a short shifter will be about $100. So $400 with everything freshened.

[kamotors]

but u spent about 1000on suspensions , so 500 or somthing doing a 5sp shouldnt be that hard hahahah. jk man

i only spent $700 on suspension:D..good ol ebay. is a 5 speed really only $500?

[bimmer_E30]

but u spent about 1000on suspensions , so 500 or somthing doing a 5sp shouldnt be that hard hahahah. jk man

[kamotors]

whats the point in all the performance mods and stuff on an automatic?

cuz i'm bored and the car runs great. i'm not some racer, i dont go to race tracks, a cars a car, its my DD, get over it, its never broken down and i love it!:) yes i'd prefer a 5 spd but who cares i got the car for $800 and yes i know everyone else thinks its a waste to spend money on an auto.