E30 335i - The new track (drift) project

[2e30]

para pap pa pa i'm lovin' it

[Yeee30]

Attached is the angle of the wheel when fully steered, but still well before you put load on it (actually sliding)

holy crap....thats sweet!

[e30 gangsta]

erick are the spacers just for use on the e36 rack?

[Bey]

Damn killer new project! Are you worried about the switch from a 4door to a coupe? It's almost like having to learn a new car, and with the event soo close will you have time to master the new chassis?

I LOVE YOUR WHEELS!

[shiboujin]

erick are the spacers just for use on the e36 rack?

You can use them on the E36 OR E30 rack. Erick runs an E36 rack with E30 tie rods. The tie rods are the real potential limiting factor. I heard E36 tie rods have more threading so they could be a safer bet. I'm going to use these on my E30 rack/rods then eventually upgrade to an E36 rack.

[Erick]

I believe I have an e36 tie rod tossed around somewhere from the rack I got, I can take a look to see if it's any better. I chose the e30 ones because I've had brand new Lemfoerder tie rods chilling for a while.

I honestly don't remember any difference in threading for the e36 ones, but they didn't look anything special.

- Erick

[Erick]

Damn killer new project! Are you worried about the switch from a 4door to a coupe? It's almost like having to learn a new car, and with the event soo close will you have time to master the new chassis?

I LOVE YOUR WHEELS!

Not really worried much, more excited than worried. It'll probably take me a while to get really used to it... it's a different suspension setup, steering setup, power delivery, etc etc.

I'm most definately not expecting to be crazy awesome on my first run, but I'll know for sure what needs to be changed or set up in order for it to work with me. :)

[etxxz]

i'm using the e36 tie rods. they are shaped differently, but i doubt you'd get more angle.. infact, i still don't understand geometrically how that spacer works

you space the inner one out, you have to thread the outer one in

[Erick]

i'm using the e36 tie rods. they are shaped differently, but i doubt you'd get more angle.. infact, i still don't understand geometrically how that spacer works

you space the inner one out, you have to thread the outer one in

If you were to put the spacer between the inner and the outer, then yes.

Now, I agree with you in the sense that I've tried to explain how its different from the rack, and the only explanation I came up with as to why it's different spacing from the rack itself confuses the hell out of even me :p

So no official answer until I can find an easier way to explain it lol

By the way Luis.... we already did S52 vs turbo M20. Now it's S52 vs M30. It's your turn for an engine swap now so we can try something even newer. :p Go M60!!! :D

[Erick]

DAMN ITTTTTTTTTTTTTTTTTTTTTTTT

So I switched up the CTS, got the car running good and went to go get the car insured/tagged/etc. Called Geico, switched the policies from the turbo car to the 335i (both cars are "automatics"), so no changes there... sweet!

I then proceed to get my tags switched got massively denied at the emissions test. Those guys said the car had to stay there and that there's no way I can drive that car until I get a cat and a muffler installed.

Anybody have a truck and trailer? :p

[shiboujin]

if your car fails emissions it can't leave? thats really dumb!

[Lof8]

I didn't think there even was any emissions testing 'round these here parts.

[RickSloan]

yea whats the deal emmissions stops somewhere around the mason dixon...

[e30this]

Those guys said the car had to stay there and that there's no way I can drive that car until I get a cat and a muffler installed.

Better go sleep in it so none of your parts go missing.

[Erick]

Meh, I expected more gullible people to see how good this would turn out.

In reality I only paid $7 and got the car tagged/registered/ready.

Emissions? Pfft.... this is FL :p