Mr. B's House of Hoopties

[MrBurgundy]

Mmm, perpetual valve cover oil leaks, nice.

False, there are leak free ones. You just gotta know what you're doing ;)

[roguetoaster]

ding ding ding

It's the OM617

Mmm, perpetual valve cover oil leaks, nice.

[MrBurgundy]

Mercedes 5cyl turbo diesel.

ding ding ding

It's the OM617

[MrBurgundy]

i3 swap?

>:C

I would never

[rturbo 930]

Mercedes 5cyl turbo diesel.

[2mAn]

i3 swap?

[MrBurgundy]

m42

Also WRONG.

It's got one more cylinder and a turbo

[MrBurgundy]

M10, the clear upgrade path for a Lima, which says something.

har har har

NEVER

[2mAn]

also, the 302 is gone, but i'm picking up the engines replacement this week and it's not american.... .....it's..... German

i'm sure one of you guys could guess what it is

m42

[roguetoaster]

Also, the 302 is gone, but I'm picking up the engines replacement this week and it's not American.... .....it's..... German

I'm sure one of you guys could guess what it is

M10, the clear upgrade path for a Lima, which says something.

[MrBurgundy]

Picked up some 'bucket' seats from a 2000 Ford Explorer.

Driver's seat is fully powered. Got them for 30 bucks and they were pretty beat.

My trucks interior now is grey, but I'll be swapping the dash and panels for brown ones to match the new leather.

Super happy with how they turned out..

Before

Untitled by Omar Mountain, on Flickr

After

Untitled by Omar Mountain, on Flickr

Also, the 302 is gone, but I'm picking up the engines replacement this week and it's not American.... .....it's..... German

I'm sure one of you guys could guess what it is

[MrBurgundy]

HVAC and OBC 'rebuild' is all done.

Also, added a 350mm sparco wheel which is the best mod to compliment the Z3 rack. No where near as twitchy and the wheel is much closer to me. I'm 6'1 so i got the seat back pretty far so those tight turns with the big MT1 wheel was not fun.

Untitled by Omar Albasateneh, on Flickr

It's hard to see the cluster now with this wheel.. But still worth.

Untitled by Omar Albasateneh, on Flickr

The Ranger got a small upgrade as well. The truck didn't come with a tach from the factory, but was optioned on the 6 cylinders and some 4 cylinder trucks. They're all plug and play even between different engines. My fuel gauge took a shit, so It was time to upgrade.

Having a manual truck with no tach, was super lame. Loving the look of the tach cluster layout.

This is what my interior endures after driving around in the desert for a couple days lol

Untitled by Omar Albasateneh, on Flickr

New cluster got popped in this morning. 150 fucks and 5 minutes of work.

Untitled by Omar Albasateneh, on Flickr

Untitled by Omar Albasateneh, on Flickr

The truck did great this weekend.

I averaged about 21-22 MPG going uphill and eventually up the mountain fully loaded, maybe ~300 lbs and an extra person. I'm really enjoying the 4 banger rn. Especially w the gas prices rn.

Woke up one morning out in the desert with a flat... Full sized spare ftw.. Ended up blowing a valve stem.. drove into town and got it fixed. Other than that the Ranger did what it needed to do.

Untitled by Omar Albasateneh, on Flickr

random e30 pics.. Sorry 2man, his i3 didn't make the cut lmaoooo

post canyon run pics in Malibu. We found some awesome one way twisty roads up in the canyons with no one in the way.. Had a great time up there with Simons i3, the 914 and myself

Untitled by Omar Albasateneh, on Flickr

[MrBurgundy]

My truck's steering has been particularly shitty recently... It was honestly difficult to drive the truck at highway speeds, so I ordered up the inner tie rod and drag link. Outer tie rods were changed when I got the truck, these ball joints were the last ones left.

I had a trip out to the desert this past weekend, so I wanted to address that. Also, my bake lines were pretty worn, so I picked up a set from 4wheel parts 20 minutes from my shop in compton, which was awesome. Extended for my lift and were supposed to be a direct fit.

Untitled by Omar Albasateneh, on Flickr

Untitled by Omar Albasateneh, on Flickr

Untitled by Omar Albasateneh, on Flickr

Plenty of slack now for when the wheel drops and turns to lock

Untitled by Omar Albasateneh, on Flickr

I love the look of beams. They're just so beefy

Untitled by Omar Albasateneh, on Flickr

Also did some boring stuff, like turn the rotors and a fresh set of pads. Brake pedal was pulsing bad because of the rotors. Nice and smooth now.

Running out of things to replace on this lil fckr..


This is our plot of desert land. 'MERICA

Had a fun weekend shooting, drinking beers and continuing to clear the land of shrubs.

Next week I'll be returning to fill some ruts in the road for our up coming event. Will be taking a load of gravel and a drag mat to tidy it up. It's about a three mile stretch that needs to be worked on.

Many beers to drink. Many holes to fill. har har har

We got a drone now, so sick pics are cuming.

NEXT HOOPTIE

Got the HVAC panel out the e30 to fix some broken bulbs, a perpetually spinning recirculation stepper motor, the OBC display and tidy up some DIY stereo install nonsense. Also, my PS system has been a little leaky, so it's going to get a refresh on everything minus the rack.

Parts patiently waiting to be installed..

Untitled by Omar Albasateneh, on Flickr

The nest

Untitled by Omar Albasateneh, on Flickr

NEXT HOOTIE

The batteries in my e39 keys are both dead. If you don't know e39 keys and all others from that gen minus the 7 series had non serviceable batteries, so you have to cut the key open to access the battery, then you have to cut these tiny little spot welds on the prongs that contact either side of the battery.

DUMB - but we make it work

Untitled by Omar Albasateneh, on Flickr

In recovery

Untitled by Omar Albasateneh, on Flickr

Began the deep clean of the e39 interior and got some parts to fix the stereo pixel display, cupholders, the center storage bin and another storage tray on the armrest.

I purchased this pneumatic carpet tornado thingy. Worth every penny.

Untitled by Omar Albasateneh, on Flickr

Untitled by Omar Albasateneh, on Flickr

The amount of dust that came off was honestly disturbing.

Super happy with this tool

Smelt some burning of oil, so the VCG needs to be replaced today..

[roguetoaster]

Again, Dakota convertible is what you need.

[2mAn]

...I should get that Rusty FJ just to keep up with the times...

If I have a good vert to play with I’d be more inclined to dump money into a rust bucket (not talking about the Alfa)