Official leather line release

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cletonius
    R3VLimited
    • Oct 2010
    • 2809

    #31
    Originally posted by F34R
    My bad dude, like Sleeve said. I have so many people to respond to. Sent ;D
    No worries, I know how it is. Replied good sir. I'm looking for something classy.
    - Josh
    1990 325is

    Need a shift boot?
    Looking to buy shift boot frames, PM if you have one to sell

    Here's what happens when you let the internet pick your license plate

    Comment

    • F34R
      sLaughter
      • May 2009
      • 12390

      #32
      Just finished a new design for a member here. It is a gauntlet style for his Breitling watch.

      Just a mock up with a similar sized Timex I had laying around. It is held in place with post screws once he gets it to mount to his watch. The gauntlet is made from 4-5oz veg tanned tooling hide and the 2-3oz Bison watch straps are stitched with synthetic sinew. The edging is diamond punched with double needle borderline stitching. And a double snap retaining clasp.





      This one is a present I made for my Grandpa, is uses a 4-5oz strap with a 1.5oz pig leather to hold the watch to the band. The band is slotted and the pig leather is looped through underneath. Then double needle stitched and held in place with the snaps.

      The smile and tears made it worth everything to me.




      ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

      Instagram: @BWeissLeather

      Current cars:
      ~ '87 325 M30B35 swap
      ~ '87 535
      ~ 01 540 Msport 6spd
      ~ '06 X5 4.8is

      Comment

      • IronFreak
        No R3VLimiter
        • Dec 2012
        • 3702

        #33
        What do you charge for the bands? I have a Nixon gauntlet watch and the band is shot.
        sigpic

        Rebellion Forge Custom Fabrication

        1988 325is - TrackRat in progress

        Instagram @rebellionforge

        Comment

        • F34R
          sLaughter
          • May 2009
          • 12390

          #34
          Originally posted by IronFreak
          What do you charge for the bands? I have a Nixon gauntlet watch and the band is shot.
          35-70 depending on desired levels.
          ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

          Instagram: @BWeissLeather

          Current cars:
          ~ '87 325 M30B35 swap
          ~ '87 535
          ~ 01 540 Msport 6spd
          ~ '06 X5 4.8is

          Comment

          • myinfernalbmw
            E30 Mastermind
            • May 2007
            • 1736

            #35
            Your leather threads have encouraged me to tackle the knife sheath I've been wanting to make for the last year. I'm also finishing an owb pancake style holster for my S&W. Keep up the good work, I'm hoping to pick up one of your belts here eventually. I'm blowing to much money on tools and leather right now lol

            Comment

            • F34R
              sLaughter
              • May 2009
              • 12390

              #36
              New bifold design:


              ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

              Instagram: @BWeissLeather

              Current cars:
              ~ '87 325 M30B35 swap
              ~ '87 535
              ~ 01 540 Msport 6spd
              ~ '06 X5 4.8is

              Comment

              • F34R
                sLaughter
                • May 2009
                • 12390

                #37
                New design for a more detailed belt.

                This is the Artisan tuck belt. The buckling section is thinned down to 3/4" and the overlap is tucked into the belt via a slot. Artisan stitching details.
                It is both a male and female style.

                Artisan Distressed effect.




                ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                Instagram: @BWeissLeather

                Current cars:
                ~ '87 325 M30B35 swap
                ~ '87 535
                ~ 01 540 Msport 6spd
                ~ '06 X5 4.8is

                Comment

                • F34R
                  sLaughter
                  • May 2009
                  • 12390

                  #38
                  Timex Weekender with a Bison strap and maroon hand stitched details.




                  ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                  Instagram: @BWeissLeather

                  Current cars:
                  ~ '87 325 M30B35 swap
                  ~ '87 535
                  ~ 01 540 Msport 6spd
                  ~ '06 X5 4.8is

                  Comment

                  • F34R
                    sLaughter
                    • May 2009
                    • 12390

                    #39
                    Extremely limited run of Stingray wallets. I have enough to make three black and one dark red. So if you want a 100% real stingray wallet for under 150.00 this is the place!
                    No fake china stingray leather here, handstitched and two card slots made from stringray. The backing the you will see when folded will be stingray. The face will be made from 4.5oz vegtanned to make it rigid.

                    The black are 85 shipped and the red is 120 shipped.
                    The only reason I can price these so low is because they went on sale. So if you own a stingray belt...it is time to get a matching wallet!!!!







                    Also have a limited supply of red Bison! This is for watch straps.

                    40 each shipped.
                    Last edited by F34R; 10-05-2013, 01:25 PM.
                    ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                    Instagram: @BWeissLeather

                    Current cars:
                    ~ '87 325 M30B35 swap
                    ~ '87 535
                    ~ 01 540 Msport 6spd
                    ~ '06 X5 4.8is

                    Comment

                    • F34R
                      sLaughter
                      • May 2009
                      • 12390

                      #40
                      Also have one section of hair on hide. The hair does not fall out, you have to really REALLY beat on it or rip the hair out. I had to pull as hard as I could to get some off it.
                      80 shipped

                      ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                      Instagram: @BWeissLeather

                      Current cars:
                      ~ '87 325 M30B35 swap
                      ~ '87 535
                      ~ 01 540 Msport 6spd
                      ~ '06 X5 4.8is

                      Comment

                      • F34R
                        sLaughter
                        • May 2009
                        • 12390

                        #41
                        Mr Sleeve wanted a case for his Leatherman. Here it is:



                        It is a 1pc construction to avoid falling apart at too many seams. It is quad stitched down the sides then the base is pie cut and folded then triple stitched.


                        Here is another batch of wallets. Bison brown on top is mine and the bottom Canyon rust is for Blunt(Steve)



                        And here is some door pulls made for Frank(owner of #Boostmeupbuttercup)

                        *They are distressed to match his WWII theme door cards. Copper grommets.
                        ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                        Instagram: @BWeissLeather

                        Current cars:
                        ~ '87 325 M30B35 swap
                        ~ '87 535
                        ~ 01 540 Msport 6spd
                        ~ '06 X5 4.8is

                        Comment

                        • F34R
                          sLaughter
                          • May 2009
                          • 12390

                          #42
                          Here is the stingray all finished:





                          And a oxblood with contrast leaf and lettering:



                          ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                          Instagram: @BWeissLeather

                          Current cars:
                          ~ '87 325 M30B35 swap
                          ~ '87 535
                          ~ 01 540 Msport 6spd
                          ~ '06 X5 4.8is

                          Comment

                          • evandael
                            R3VLimited
                            • Oct 2009
                            • 2881

                            #43
                            you're getting pretty good at this, man. i like the latest crop of goods.

                            Comment

                            • F34R
                              sLaughter
                              • May 2009
                              • 12390

                              #44
                              Originally posted by evandael
                              you're getting pretty good at this, man. i like the latest crop of goods.
                              Thank you very much, I am also getting a ton faster. It did help I made forms for the wallet!
                              ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                              Instagram: @BWeissLeather

                              Current cars:
                              ~ '87 325 M30B35 swap
                              ~ '87 535
                              ~ 01 540 Msport 6spd
                              ~ '06 X5 4.8is

                              Comment

                              • Balleristic31
                                R3V Elite
                                • Aug 2009
                                • 4198

                                #45
                                Got my wallet today and all I can say is awesome!!!
                                Very nice professional piece and Brandon did exactly what I wanted with the dye. Thanks again man :up:

                                -NICK

                                Comment

                                Working...