Back to tail dragging. Warning Honda content.

[Exodus_2pt0]

Its called......TORQUE STEER !!!! Because FWD............

Nope, it's called someone installed one of the radial bushings backwards.

Thus allowing about an inch extra of forward caster when accelerating. Plus, torque steer on Honda's is to the right due to the shorter axle shaft on the right hand side.

Moving on.

Old on the top, in the orientation they came out. Bottom, proper orientation. I went ahead and installed new ones on both sides since I was there.



Broken bolt. Took a little while to drill that one out to repair it.



Spent the day on the suspension and running around tracking down parts. The car feels much much better now, a little less of a death trap.


Oh, check out my sweet push button start. That's next weekend, gotta go back to basics on this one.



And the good stuff.




Got a long way to go, but at least now I feel comfortable driving it. Took it on the highway today and was rather impressed. It feels pretty solid now. Only downfall is 4k rpm's at 70mph.

and yea, I need new tires. Going to wait a bit and just snag someones wheel/tire combo off of craigslist.

[Exodus_2pt0]

You need torque to experience torque steer.

This. Sadly though amongst the Honda circles this motor is considered a torque machine.

[anabolice30]

Put a k series in brah

[Exodus_2pt0]

Nah, ebay turbo kit with good tuning.

[MPLFoster]

Nice. Nothing wrong with a spunky Honda.

[anabolice30]

Turbo works too mayne

[Gordo0208]

Nah, ebay turbo kit with good tuning.

Hey man, I just wanted to say congrats on the purchase, I wish you the best of luck bro. I've been a fan of the 88-91 chassis all my life and have owned a handfull of them with a variation of swaps. The B20B is a great engine though I wonder why he didnt go with a B20Z if he was going JDM but, it is what it is. Btw, the "EF" only refers to the JDM models, USDM models all bear the "ED" designation, yours specifically is an ED7. Honda decided to change designation for the different markets unlike BMW.
You might want to look into a traction bar to take care of that wheel spin, Avid and K Tuned both make great traction bars. Installing an LS 5th gear is the most common solution for the 4k @ 70mph.
I agree 100% with your ebay turbo kit idea, I had one myself. Just change the HG and get ARP head studs, boosting @ 10-12psi will net you 300whp and 300lb/ft. I recommend something around an 18 or 20G turbo and if it's possible for you, have Jeff Evans tune it for you. He's like Randy at Epic when it comes to Hondas and he does e-tunes if you can't make it to PA.

If you ever need an info or anything feel free to hit me up I'd love to help with any I can. Once again, congrats and best of luck!

[Exodus_2pt0]

Hey great info, thank you.

As far as the engine, technically it is a b20z. It is the high compression motor with the knock sensor on the back.

So far I'm loving the car. Now that the suspension is in better condition its a ton of fun to drive. I think that before I go turbo it will be getting an eBay exhaust system. Cant beat $200 for a header back setup.

I really want to go through all of the suspension and clean up the engine bay before adding any real power to it.

[E30_Pare]

what good is a tarbo without an LSD trans.

[Gordo0208]

Hey great info, thank you.



As far as the engine, technically it is a b20z. It is the high compression motor with the knock sensor on the back.



So far I'm loving the car. Now that the suspension is in better condition its a ton of fun to drive. I think that before I go turbo it will be getting an eBay exhaust system. Cant beat $200 for a header back setup.



I really want to go through all of the suspension and clean up the engine bay before adding any real power to it.

That's great then!! They have too many variations of the B20B lol

Consider that you might have to change thst exhaust when you go turbo, the piping may be too small for 300whp.
I know people shit on OBX a lot but, I had a full OBX system on my first hatch and I have to admit, not only did it withstand a lot of abuse it was REALLY quiet. I mean a very nice low deep sound comparable to the Apexi WS2. I had the full header back system with a K&N.
If you want to keep the suspension budget friendly I can vouch for Tein S.tech's with Tokico HP's. I went to UTI in Exton, PA and lived about 30-45 mins north of the school, only one road and it was all up twisties, I used to drive like an asshole then and let me tell you thay car drove fucking awesome, I did have all brand new bushings though.

You're making me want another now, DAMN YOU!! Lol

[Gordo0208]

what good is a tarbo without an LSD trans.

You're 100% right bro, but 1. we don't know if his b16 is the lsd equipped one 2. Cable lsd b16 transmissions are hard to come by in good condition, there wasn't a great deal of them made either so the people who sell them take advantage of that =/

[flyboyx]

wy u no e30?

[E30_Pare]

You're 100% right bro, but 1. we don't know if his b16 is the lsd equipped one 2. Cable lsd b16 transmissions are hard to come by in good condition, there wasn't a great deal of them made either so the people who sell them take advantage of that =/

Other than minor bolts ons I dont see any point in boosting or building any fwd honda without an lsd trans. Especially when lsd trannys are around 1k it just doesnt add up.

[Exodus_2pt0]

what good is a tarbo without an LSD trans.

FWD is a different game than RWd. LSD only really makes a significant difference in the corners. Granted this is still a big deal when powering out of a corner, but you can still use the power when accelerating without doing a one wheel peel like RWD, so long as the wheels are straight.

My GLI was over 400hp without an LSD and the only time I noticed was when I attempted to accelerate hard out of a corner.

Also, this trans grinds 2nd sometimes, so when it grenades I'll put something else in.

[Gordo0208]

Other than minor bolts ons I dont see any point in boosting or building any fwd honda without an lsd trans. Especially when lsd trannys are around 1k it just doesnt add up.

To be honest bro, it doesn't matter. He'll spin with an LSD or not and he'll spin a lot. He's also going to have to change that transmission regardless as the B16 trans is NOT boost friendly, he'll fall out of boost every time and will most likely top out at around 120mph in 4th. But, he has a lot of time to figure this all out. His best options are an LS trans which he will have to add the LSD to or a GSR LSD equipped trans which will require a cable to hydro conversion. The traction bar isn't an option it's a requirement. In the end, him being happy is all that matters so whatever keeps him content is what he should do.