15" IX Wheels?

[Luis325]

Anyone have pictures of non IX E30's with 15" IX weaves?

Better if the car is Red 2 door with 15 weaves or IX Weaves!!!
I want to get an idea on how my car would look?

Thanks

[nando]

they look exactly the same as 15" euroweaves, except maybe half as much lip.

[GOOBER]

my car...

ix weaves with 20mm spacers

[travis816]

^4x4in

[Luis325]

Man they look nice!!!!!!!
What spacers are you runing and where did you get them??

[cyrmanj]

Hi all,

325i on IX weaves with custom made 17mm spacers and 205/55R15 tires:







It is easy to appreciate that the front tires fit is tight regarding the track width, but looks just fine. On the back one's I consider that increasing tire width can improve the looks a bit, also adding a bit wider spacers could work.

[Luis325]

the post he wrote says 20mm spacers...


OT are euroweaves same offset as reg weaves any body?

Sorry about that i meant what brand?
Who sell them?

[nando]

the post he wrote says 20mm spacers...


OT are euroweaves same offset as reg weaves any body?

as 14" weaves? no, because they are wider. ET30, 6.5" vs ET24, 7"

if you wanted to make the ix weaves the same offset as euro weaves you'd need an 18mm spacer

[Luis325]

Ok im new to this offset/spacer thing... If i dont use a spacer what will happen, will they rub or look tucked in the fender???? I installed on in the front and it looked ok.....

Ill take some pics later...

[yberther]

^^off topic but thank god about your sig, it was f'king huge.

[cyrmanj]

Ok im new to this offset/spacer thing... If i dont use a spacer what will happen, will they rub or look tucked in the fender???? I installed on in the front and it looked ok.....

They will rub on the spring mount/base and/or shock. If you have IX weaves with offset ET41 you'll need the spacers.

[Tbolt]

http://www.r3vlimited.com/board/showpost.php?p=1620494&postcount=2

red = check
2 door = check
15" IX weaves = check

suspension is h&r springs and kyb
also 15mm spacers front and rear

[GOOBER]

Ok im new to this offset/spacer thing... If i dont use a spacer what will happen, will they rub or look tucked in the fender???? I installed on in the front and it looked ok.....

Ill take some pics later...

They rub...badly against the shock tower. Ask me how I know

[36brua]

question

when using spacer do you change to wheel studs or ? Thanks