I need a new sig please!

[e30s52]

Why would you do a swap without refreshing a motor? Oh thats right, because it's the right way, and you wouldn't do that now would you?

Or maybe rebuilding an engine is too complicated for your little mind?

this is coming from the person who made these shitty ass inserts and calls them bumpers. And you just proved my point. Do you undersstand what the costs are refreshing these motors? or did you just spray paint them and call it refreshed? figure it out kiddo.

O and you still didnt answer my question about the internals of an s50 vs. s52.

[e30rcr]

this is coming from the person who made these shitty ass inserts and calls them bumpers. And you just proved my point. Do you undersstand what the costs are refreshing these motors? or did you just spray paint them and call it refreshed? figure it out kiddo.

O and you still didnt answer my question about the internals of an s50 vs. s52.

Sorry I keep forgetting that you backyard shadetree mechanics don't get your parts at wholesale costs. I guess being an ASE certified mechanic and working in the industry has it's benefits right.

I can rebuild an engine, but no, you got me, I have no idea what the difference is between any internal parts. [/sarcasm]

Just stop, you're making yourself look like an idiot, what is this trivia pursuit?

Well at least I got a sig out of it

[e30rcr]

I dont buy used parts for a resone .

You bought a USED engine and tranny didn't you? Did you buy a BRAND NEW brake booster too for your swap? Or a BRAND NEW driveshaft?

Wait wait, were you the guy who bought that elusive BRAND NEW e30?!?!? OMG!

[Farbin Kaiber]

You bought a USED engine and tranny didn't you? Did you buy a BRAND NEW brake booster too for your swap? Or a BRAND NEW driveshaft?

Wait wait, were you the guy who bought that elusive BRAND NEW e30?!?!? OMG!

Gee, Your starting to sound a bit pompous with this and the post above. That should end soon.

[e30s52]

You bought a USED engine and tranny didn't you? Did you buy a BRAND NEW brake booster too for your swap? Or a BRAND NEW driveshaft?

Wait wait, were you the guy who bought that elusive BRAND NEW e30?!?!? OMG!

your a fucking idiot you know that.

Sorry I keep forgetting that you backyard shadetree mechanics don't get your parts at wholesale costs. I guess being an ASE certified mechanic and working in the industry has it's benefits right.

I can rebuild an engine, but no, you got me, I have no idea what the difference is between any internal parts. [/sarcasm]

Just stop, you're making yourself look like an idiot, what is this trivia pursuit?

Well at least I got a sig out of it

Wow claiming you have somthing on the internet bad ass dude. And yes I do get my parts at whole sale price. I am sher that you dont know what the internal diffrence is.

Your like an 3 year old everything you say is the only answer. Get a life, and a exercise program then come talk to me.

Your worse then a 3 year old. Get a fucking life.

[e30rcr]

Gee, Your starting to sound a bit pompous with this and the post above. That should end soon.

Your right, I actually stepped back and asked myself if I was turning into Jordan

Dear kid whom I'm arguring with on the internet:

I have proved all of your arguments futile and blatantly wrong. You have resorted to name calling which is more of a personal matter, so please if you have a personal problem with me deal with it face to face. Otherwise, just realise you really have no idea who I am and what I do but I can guarentee everything i've said in this thread is the truth.

Stop arguing over the internet, and go try to harvest some kind of social skills.

-Matt

[Nicademus]

Can you just go back to Gaye30 or bay or whatever its called? Why are you even here? You're really annoying.

!!!!!! Your bumpers are illegal !!!!!!

Passenger Vehicle Bumper Requirements

28071. Every passenger vehicle registered in this state shall be equipped with a front bumper and with a rear bumper. As used in this section, "bumper" means any device designed and intended by a manufacturer to prevent the front or rear of the body of the vehicle from coming into contact with any other motor vehicle. This section shall not apply to any passenger vehicle that is required to be equipped with an energy absorption system pursuant to either state or federal law, or to any passenger vehicle which was not equipped with a front or rear bumper, or both, at the time that it was first sold and registered under the laws of this or any other state or foreign jurisdiction.
Amended Ch. 451, Stats. 1973. Effective January 1, 1974.

[e30rcr]

your a fucking idiot you know that.



Wow claiming you have somthing on the internet bad ass dude. And yes I do get my parts at whole sale price. I am sher that you dont know what the internal diffrence is.

Your like an 3 year old everything you say is the only answer. Get a life, and a exercise program then come talk to me.

Your worse then a 3 year old. Get a fucking life.

Quoted for later laughs.


Just FYI I was planning a nice turbo build, it got shut down when I was helping a friend build his LS2 and I saw the dyno results:

M50 Block
S52b32 crank
JE 84mm Pistons 8.2:1 Compression
M52 head
M52 valves
Double valve springs (turner)
Ti retainers
m52 rockers
Pauter rods

[e30s52]

Your right, I actually stepped back and asked myself if I was turning into Jordan

Dear kid whom I'm arguring with on the internet:

I have proved all of your arguments futile and blatantly wrong. You have resorted to name calling which is more of a personal matter, so please if you have a personal problem with me deal with it face to face. Otherwise, just realise you really have no idea who I am and what I do but I can guarentee everything i've said in this thread is the truth.

Stop arguing over the internet, and go try to harvest some kind of social skills.

-Matt

I would gladly meet you face to face. Most of the things you have said are wrong and just plain stupid. I know your some guy who works for a shitty shop and calls himself a tech. And I'm betting you copyed that spec build from bf.c your an idiot with too much time on your hands I get it.

[Nicademus]

Everything you've said is true? How about the fact that your bumpers are illegal? Just admit that you don't care that they're illegal or something; its obvious, especially when you live in California.

[1987325IS]

Everything you've said is true? How about the fact that your bumpers are illegal? Just admit that you don't care that they're illegal or something; its obvious, especially when you live in California.

exactly.

and i like how you post up and say your ASE certified like its hard to get that or something? i trained monkey can get ASE certified its nothing special its not hard to do. AT ALL haha hell good year tire techs are ASE certified so big whoop on that one guy.

i seriously doubt that the metal bumper supports behind the plastic bumpers are only good for 2.5mph....the cars would have never passed DOT regulations with bumpers like that....hell just last week i spun out and hit a huge hill with mine....impact at 40mph and didn't hurt the bumpers...just bent a core support..... your a clown dude..... i am getting nothing but laughs from everything you post....

[e30s52]

I bet the tool that you use most in your craftsman tool box is JB weld.

[Mtriple]

Hell no, drag racing is boring.

I pull on e46 m3's down the front straight at thunderhill.

I pulled on a Don Field's built 2.5 at BIR with my POS S50 E30. What's your point?

[atomic]

Hell no, drag racing is boring.

I pull on e46 m3's down the front straight at thunderhill.

[Fidhle007]

Hell no, drag racing is boring.

I pull on e46 m3's down the front straight at thunderhill.

You've never been on a dragstrip, have you?

Now let's see this some video of this mythical M3 of yours pulling in an E46 M3...



And let me just remind you how you bought this car whereas I built mine by myself in a weekend. So why would I want an M3 that someone else built when I can have a 325is that I personally put together that's faster and handles better?