Where to buy massive fender flares?

[widebodye30]

Your flares look like they won't be slammed with big tires friendly. I thought the whole point was to cut out some of the stock fender to give more room, those just make them wider....

Oh yes they will be big tire friendly trust me:) just wait and see when the car is finished.;)
Thanks,

[Pudmunkie]

Your flares look like they won't be slammed with big tires friendly. I thought the whole point was to cut out some of the stock fender to give more room, those just make them wider....

Id assume those will eventually be 'hollowed' out similar to the IE flares.

Do you have any shots from the front 3/4 or front on... Just trying to get a feel for how they alter the profile of the car. I like the I.E flares but they are just such a drastic change in body line.

I'd be pretty interested in these if they work w/out the skirts. They seem to really enhance the stock body lines. Any idea how wide you could go back there? 255?

[erik325i]

soo true!

I have Ireland flares and they work pretty good. I don't like how they don't go far enough down on the rear fenders. other guys have tilted them to make the gap disappear, but i don't like the way that looks either.

I have the IE flares on the rear of my 325i and they go all the way down to the rockers. They're not perfect though.

Here's mine with my 17x10 A's
I don't have any better pics of them at the moment.

[widebodye30]

Id assume those will eventually be 'hollowed' out similar to the IE flares.

Do you have any shots from the front 3/4 or front on... Just trying to get a feel for how they alter the profile of the car. I like the I.E flares but they are just such a drastic change in body line.

I'd be pretty interested in these if they work w/out the skirts. They seem to really enhance the stock body lines. Any idea how wide you could go back there? 255?

They will be hollowed inside obviously lol to fit wide tires:) You should be able to clear up to 265 in the back with the right offset;) I will make a new thread with alot of installed pixs and prices soon!

[Pudmunkie]

They will be hollowed inside obviously lol to fit wide tires:) You should be able to clear up to 265 in the back with the right offset;) I will make a new thread with alot of installed pixs and prices soon!

Let me know when the 2 dr variation is available!

[Blip Bavarian]

what size tires are you running on the 17x10? what size wheels and tires are you running up front with the IE flares? offsets?

moar pics! car looks sick. judging by your M3 im sure its BA.

I have the IE flares on the rear of my 325i and they go all the way down to the rockers. They're not perfect though.

Here's mine with my 17x10 A's
I don't have any better pics of them at the moment.

[e30polak]

Ary, can you make them have the pre-done indents for rivet fitment like the ones on that Datsun? They're like that on the rivet on e36 flares as well. I think it looks way better!

BTW I'm interested in a set when you finish them! :D

[widebodye30]

These pixs are prototypes....minor adjustments have been made for the final product! 4dr flares will be made first since were working on my car and then we will make 2dr.
here are some prototype pixs... flares are 2" wider than stock fenders:)

^^^

Ary, can you make them have the pre-done indents for rivet fitment like the ones on that Datsun? They're like that on the rivet on e36 flares as well. I think it looks way better!

BTW I'm interested in a set when you finish them! :D

They will have the rivet indentations on the flares:) More like the miata and datsun style flares but direct fit for the e30;)

[omar85]

I have Ireland flares and they work pretty good. I don't like how they don't go far enough down on the rear fenders. other guys have tilted them to make the gap disappear, but i don't like the way that looks either. Front fits great.

in general erics car is fucking dope, but IE flares are easily the most disgusting item you can buy for your e30.


I am feeling that red 4-door so far.

[widebodye30]

I am feeling that red 4-door so far.

Thanks:D here is a link to the thread: http://r3vlimited.com/board/showthread.php?t=155873

[RickSloan]

any high res of the 240? and i like where the flares are going ary and i agree the the cut outs for the rivets make the flares

[erik325i]

what size tires are you running on the 17x10? what size wheels and tires are you running up front with the IE flares? offsets?

moar pics! car looks sick. judging by your M3 im sure its BA.

I'm not sure of the exact offsets, but I would be able to fit more tire in there if the offsets were higher. Right now I have super stretched 235s in the back.
I have the IE flares for the front, but they were never put on. My plans are to remove the IE flares and go full weld on flares all around if I ever get around to it.

Erik

[Eric]

in general erics car is fucking dope, but IE flares are easily the most disgusting item you can buy for your e30.


I am feeling that red 4-door so far.

I agree, it is probably the part i like least about the car. Now that Ary is actually making something with customer demand, i might have to purchase something from him!

Ary - I already hacked my fenders to shit underneath the IE flares. what type of trimming will your fenders allow? And please please don't sell these for some stupid amount like $200 a fender:hitler:

[widebodye30]

Thanks:D here is a link to the thread: http://r3vlimited.com/board/showthread.php?t=155873

READ^^^:p

I agree, it is probably the part i like least about the car. Now that Ary is actually making something with customer demand, i might have to purchase something from him!

Ary - I already hacked my fenders to shit underneath the IE flares. what type of trimming will your fenders allow? And please please don't sell these for some stupid amount like $200 a fender:hitler:

M.S.R.P. $345.00 R3V special $295.00 for a limited time only......

[Blip Bavarian]

Ary, I was looking at the pics of your car, and it looks like you molded the fenders to match up to your side skirts. For those of us who dont have skirts, will the fender step in, or will it have smoothly die into the body?

Hope that makes sense.