Announcement

Collapse
No announcement yet.

Best 15 in lightweight? Kosei K1 vs TrMotorsports C1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #76
    Originally posted by einstein57 View Post
    Have you seen them? I have not even seen a redering yet. This is a different design then the normal 6ul. They are 10 spoke so maybe they will look like the C3M's. I'm sure the weight is from the extra meat of the hub area to make it a lower offset. But 15x9 sounds like a sweet setup
    Originally posted by Wh33lhop View Post
    Too bad the 6ULs look like poo. If the new ones look better, they may be a better candidate if just for the direct fitment, but as it sits, between the C3Ms/spacers and 15x9 direct-fit 6ULs, I'll take the C3Ms.
    Where did I mention that I know how the 6UL XTR looks? I said the old one looks like shit, and hopefully the new one looks better.
    paint sucks

    Comment


      #77
      miss read your poo comment
      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

      www.gecoils.com
      My euro 316 project Transaction Feedback

      Comment


        #78
        Pics posted of both 6UL models please.

        Comment


          #79
          I will be looking into these different sets in the next couple of months when I buy an e30 for a DD.

          The 6ULs aren't all that bad looking IMO. The new TRMotorsport wheels look the best IMO. And the originals are pretty sick too.

          The Team Dynamics never appealed to me since they run so narrow.
          Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc

          INSTAGRAM: @UNDR8D_EMPIRE

          Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356

          Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

          Comment


            #80
            I really like that C3M... 15x9 and recommends running 225.45.15 so R Comps or the RS3 Hankook. I am going to want a 15" wheel that clears UUCs brake kit for the track.

            Comment


              #81
              Originally posted by graphikg View Post
              Pics posted of both 6UL models please.
              Have you read any of the thread? Nobody knows what they look like yet.

              Originally posted by e30polak View Post
              I will be looking into these different sets in the next couple of months when I buy an e30 for a DD.

              The 6ULs aren't all that bad looking IMO. The new TRMotorsport wheels look the best IMO. And the originals are pretty sick too.

              The Team Dynamics never appealed to me since they run so narrow.
              I think the current 6ULs look like shit, without the lip afforded by the width they're available in, they would be even worse. Bulging spokes, even if functional (for caliper clearance) just are not attractive in any situation, the SSR GT2 and Competitions being the only exception I've noticed. The C1 is okay, I'm not a huge fan but I'd consider it, they're concave at least. The C3M? Fuck yeah, looks awesome. The bottom line here, though, is that both TRM and 949 are releasing reasonably priced, viable wide 15"ers for the E30 platform and they should both be praised for it. Imagine if we had 10 different wheels to choose from in 15x8 or 15x9 at $100 apiece.Sometime in the next year I'll be in the market to purchase a set of wide 15s and I'll definitely be going to one of those vendors, depending on how attractive the new 6ULs are. I can't wait to see some C3Ms mounted on an E30.

              Re: the width, I am totally with you there. 8" of width is my minimum for aftermarket wheels, and no I'm not going to be stretching any tire. :p It's great to see some vendors releasing something wider than the typical 15x7 you see everywhere.

              Originally posted by dinanm3atl View Post
              I really like that C3M... 15x9 and recommends running 225.45.15 so R Comps or the RS3 Hankook. I am going to want a 15" wheel that clears UUCs brake kit for the track.
              I think if you space the C3Ms out they will have a decent chance of clearing. After all, they don't have the same bulging spoke design as the LTW5 but they do have another inch of front spacing over the LTW5s if you space them out to the same offset, and probably more since you'll most likely have to space them out a little further to clear the strut.

              Word on the skreets is that tire choice in 225/x/R15 will improve soon, but the tires I've got my eye on are a little less street friendly than the RS3. ;)
              Last edited by Wh33lhop; 03-18-2010, 11:25 PM.
              paint sucks

              Comment


                #82
                whoa, good thing i stumbled into this thread. I almost bought some euroweaves. I can wait a few more months for these!

                Originally posted by einstein57 View Post
                anyone have some pics of the new 6UL XTR wheels. They sound perfect.

                XTR coming Summer 2010 - Low cost gravity cast, 10 spoke design, silver or black

                Yes these are for real


                15x7 +25, +40 4x100, 4x114.3, 5x100, 5x114.3 13 lbs $89


                15x8 +20, +36 4x100, 4x114.3, 5x100, 5x114.3 14.6- 15.2 lbs $99


                15x9 +20, +36 4x100, 4x114.3, 5x100, 5x114.3 15 -15.4 lbs $109

                Comment


                  #83
                  6ulr



                  1987 E30 cabrio | Bumper swap | H&R Sport | Koni Yellow | Eibach Sways | BavAuto strut bar | Cardinal seats
                  MTech2 wheel | Husco Armrest | Smoked Hella Smileys | 5k HID | Stromung | RS003
                  | Shadowline | Amber Fogs | Too much else to list



                  Comment


                    #84
                    Originally posted by VacMan View Post
                    That's not the wheel being discussed here.
                    1973 Bavaria

                    Comment


                      #85
                      Originally posted by VacMan View Post
                      Try again. :p Ten spokes.
                      paint sucks

                      Comment


                        #86
                        Are these TRM C3's available yet? TireRack has them, but they don't show up for the e30?
                        - Sean Hayes

                        Comment


                          #87
                          Originally posted by Sean View Post
                          Are these TRM C3's available yet? TireRack has them, but they don't show up for the e30?
                          They're miata fitment.
                          Originally posted by LJ851
                          I programmed my oven to turn off when my pizza was done, should i start a build thread?

                          Feedback

                          Comment


                            #88
                            Originally posted by chadthestampede View Post
                            They're miata fitment.
                            Aww...weak. I missed that memo above. lol
                            - Sean Hayes

                            Comment


                              #89
                              anyone have the 6UL's yet? Pics please.

                              Comment


                                #90
                                Originally posted by DarKane View Post
                                ML1590 = Me want! 15x9 and available in the right off-set.




                                Now to figure out where/how to get these in the US...

                                I like the TRM C1 and that will be what I end up with if the above are too expensive... but the C3M? ...but to each his own...

                                EDIT: Found 'em... ACK!!! 22 lbs ea??? Nevermind... :(
                                '88 325is: Diamond Schwartz; 210K miles; Koni SA; H&R springs; poly bushings (sold)
                                '03 TDi Wagon; 5 spd (Ho-hum DD; 326K miles and counting...)
                                '64 Morris Mini Cooper (w/e vintage toy #1)
                                '72 Triumph GT6 (w/e vintage toy #2)
                                '73 Volvo 1800ES (future vintage restomod project)

                                Comment

                                Working...
                                X