Also, availability / ability to replace quick and easy
+1
I don't worry about TRM C1s being available. And they are cheap, direct fit, etc.
I had ET17 K1s and liked them, but the plastic centering ring was a pain to deal with, especially if swapping to other wheels. I almost got some 15x8 rotas back in the day but then went another path. I also considered 15x8s but didn't seem worth it, especially with 205/50-15 costs and availability.
Before TRMs, TDs made perfect sense, but TRMs look better to me than Team Dynamics and are pretty popular for a reason. We're committed now and buying spares. However, that said... Jongbloed Racing's 15x7s look good!
Best 15 in lightweight? Kosei K1 vs TrMotorsports C1
Collapse
X
-
Obviously, it all depends on how you define "best."
I went with the TDR ProRace 1.2 from Bimmerworld because they were available in 15x7" with the correct offset (et25) and center bore (57.1mm) so that I don't need to use spacers or centering rings. More important, they were the only 15x7" wheels I could find that cleared my big brake kit:

They had a few other advantages: they are relatively light at 15lbs; they are dirt cheap at only $125 each; they have a reputation for being strong; and they look cool.
Now Bimmerworld offers the TDR ProRace 1.3 as well. They're even lighter (13lbs) and cheaper ($100 each). Those are the ones I'd buy if I were in the market right now.
I like what you did with the BMW logos over the center what mm size was that? and were did you get them?Leave a comment:
-
-
-
no way, I'm daily driving on 235/50-15 R888s. it's tight but you just need adequate spring rate and rolling, plus the right offset.Leave a comment:
-
I run TDM 1.3's and I absolutely love them, both in look and weight, I'm using 225 NT01's on them and cant beat bang for buck of that wheel combo. The widest tires I have seen tucked on a stock fendered e30 was a 255 RA1 @ buttonwillow one time, i havent seen it since.. If you want to go wider you would have to run some type of flares for the rear especially.Leave a comment:
-
ML1590 = Me want! 15x9 and available in the right off-set.compomotive
http://www.comp.co.uk/wheels/wheels.asp?range=CXR_0001

Now to figure out where/how to get these in the US...
I like the TRM C1 and that will be what I end up with if the above are too expensive... but the C3M?
...but to each his own...
EDIT: Found 'em... ACK!!! 22 lbs ea??? Nevermind... :(Leave a comment:
-
-
-
Are these TRM C3's available yet? TireRack has them, but they don't show up for the e30?Leave a comment:
-



Leave a comment: