What Are You Using For A Battery Tie-Down?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • TomSuddard
    replied
    Originally posted by Lof8
    Got a picture? I have no #10 in my car.
    I'll try and take one tomorrow.

    Leave a comment:


  • 5KWattson
    replied
    Motorcraft diesel battery(free) held down by shear weight. 850CCA FTW

    Leave a comment:


  • Kerrath
    replied
    I'm using... erm... gravity.

    Leave a comment:


  • mamzak
    replied
    You win.

    Leave a comment:


  • Van Westervelt
    replied
    This is in my sold coupe, but I run the same setup in my sedan.







    Leave a comment:


  • nando
    replied
    stock hold down works fine for me

    Leave a comment:


  • surebimmer
    replied
    I'm using a ratcheting strap on my DD for battery hold down. And the Braille battery mount on the race car.

    OT:
    Braille Full size battery that i saw at SEMA was like 13 lbs. Could hold it with just your pinky finger.

    Leave a comment:


  • Jean
    replied
    #5 holds the battery for me...

    Leave a comment:


  • bataangpinoy
    replied
    i have #10, but what does it actually do?

    Leave a comment:


  • Dirtbleed
    replied
    The battery is bolted to the tray and the tray is bolted to the car.

    Leave a comment:


  • Lof8
    replied
    Originally posted by TomSuddard
    I'm running a much smaller battery to save weight (I live in Florida, so I don't need starting power in the winter). I just modified #10 with some 1/4" sheet metal, works great, looks factory, and passes tech anywhere.
    Got a picture? I have no #10 in my car.

    Leave a comment:


  • TomSuddard
    replied
    I'm running a much smaller battery to save weight (I live in Florida, so I don't need starting power in the winter). I just modified #10 with some 1/4" sheet metal, works great, looks factory, and passes tech anywhere.

    Leave a comment:


  • Lof8
    replied
    Originally posted by Dirtbleed
    Bottom of threaded rod has 2 fender washers and 2 bolts

    550 CCA

    http://www.braillebattery.com/index....teries/b3121/#
    held in place by the plastic tray?

    Leave a comment:


  • JTapper
    replied
    I use the cables.

    Leave a comment:


  • Dirtbleed
    replied
    Bottom of threaded rod has 2 fender washers and 2 bolts

    550 CCA

    Leave a comment:

Working...